{"id":51,"date":"2021-06-05T17:59:34","date_gmt":"2021-06-05T17:59:34","guid":{"rendered":"http:\/\/ahmadbarari.com\/portfolio\/?page_id=51"},"modified":"2026-02-03T18:45:13","modified_gmt":"2026-02-03T18:45:13","slug":"publications","status":"publish","type":"page","link":"http:\/\/ahmadbarari.com\/portfolio\/publications\/","title":{"rendered":"Publications"},"content":{"rendered":"\n

Publications<\/h2>\n\n\n\n
\n
<\/div>\n<\/div>\n\n\n\n
\n
<\/div>\n<\/div>\n\n\n\n
\n
Journal Papers<\/summary>
\n

<\/p>\n\n\n\n

J68<\/strong>
Asbaghian F. and Barari, A., 2025, \u201cLow Fidelity Simulation in LIVE Digital Twin to Detect Rotational Errors in Production Machinery\u201d, IFAC-PapersOnLine, Volume 59, Issue 24, Pages 149-154, https:\/\/doi.org\/10.1016\/j.ifacol.2025.11.856<\/a>
J67<\/strong>
Farahnak Majd, Y., Tsuzuki, M.S. and Barari, A., 2025, \u201cOn the Sources of Non-Systematic Deformations and Defects in Metal Additive Manufacturing\u201d, IFAC-PapersOnLine, Volume 59, Issue 24, Pages 209-214, https:\/\/doi.org\/10.1016\/j.ifacol.2025.11.866<\/a>
J66<\/strong>
Najafabadi, H., Verona B., Goto, T., Martins T. C., Barari A., Tsuzuki M. S. G., 2024, \u201cPrecision refined: Integrating micromachining constraints for enhanced product accuracy through topology optimization\u201d, Journal of Expert Systems with Applications, Volume 254, Issue 15, November 2024, 124247, https:\/\/doi.org\/10.1016\/j.eswa.2024.124247<\/a>
J65<\/strong>
Khodadad Hatkeposhti J, Kordani N, Akbarzadeh Pasha M., Barari A., 2024, \u201cFracture load in double keyhole notch PLA-Cu2O nanocomposites manufactured via compression molding and 3D printing: An experimental and numerical study\u201d, Journal of the Mechanical Behavior of Biomedical Materials, Volume 153, Issue 4, Pages 106504, https:\/\/doi.org\/10.1016\/j.jmbbm.2024.106504<\/a>
J64<\/strong>
Najafabadi H. R Goto T. G., Martins T. C., Tsuzuki M. S. G., Barari A., 2024, \u201cDesigning MEMS accelerometer for enhanced sensitivity and reduced cross-sensitivity in landslide monitoring\u201d, Measurement, Volume 226, Pages 114092, https:\/\/doi.org\/10.1016\/j.measurement.2023.114092<\/a>
J63<\/strong>
Seyedi Sahebari, S.M., Bassyouni, Z., Barari, A., Abou Ziki, J., 2023, \u201cIntelligent Characterization of Spark-Assisted Chemical Engraving (SACE) Process Using Time Series Classification\u201d, International Journal of Advanced Manufacturing Technology, Volume 130, Pages 945\u2013960, https:\/\/doi.org\/10.21203\/rs.3.rs-3252792\/v1<\/a>
J62<\/strong>
Rostami Najafabadi, H., Martins, T. C., Tsuzuki, M. S., Barari, A., 2023, \u201cStructural Design with Self-Weight and Inertial Loading Using Simulated Annealing for Non-Gradient Topology Optimization\u201d, Machines, Volume 12, Issue 25, https:\/\/doi.org\/10.3390\/machines12010025
<\/a>J61<\/strong>
Ghanbary Kalajahi, E., Mahboubkhah, M., Barari, A., 2003, \u201cSkin Imaging: A Digital Twin for Geometric Deviations on Manufactured Surfaces\u201d, Applied Sciences, Volume13, Issue 23, Special Issue Smart Manufacturing and Industry 4.0, 2nd Edition, 12971, https:\/\/doi.org\/10.3390\/app132312971<\/a>
J60<\/strong>
Umaras, E., Barari, A., Horikawa, O., Tsuzuki, M.S.G., 2023, \u201cDimensional Tolerances in Mechanical Assemblies: A Cost-Based Optimization Approach\u201d, Applied Science, Volume 13, No. 16:9202, https:\/\/doi.org\/10.3390\/app13169202<\/a>
J59<\/strong>
Amiri, M.S., Ramli, R., Barari, A., 2003, \u201cOptimally Initialized Model Reference Adaptive Controller of Wearable Lower Limb Rehabilitation Exoskeleton\u201d, Mathematics, Volume 11, No. 1564, https:\/\/doi.org\/10.3390\/math11071564<\/a>
J58<\/strong>
Ghanbary Kalajahi, E., Mahboubkhah, M., Barari, A., 2023, \u201cOn Detailed Deviation Zone Evaluation of Scanned Surfaces for Automatic Detection of Defected Regions\u201d, Measurement, Volume 221, 113462, https:\/\/doi.org\/10.1016\/j.measurement.2023.113462<\/a>
J57<\/strong>
Goto T. G., Najafabadi H. R., Falheiro M. F., Moura R., Driemeier L,, Barari A., Tsuzuki M. S. G., Martins T. C., 2023, \u201cA new non-gradient-based topology optimization algorithm with black\u2013white density and manufacturability constraints\u201d, Structures, Volume 47, Pages 1900-1911, https:\/\/doi.org\/10.1016\/j.istruc.2022.12.001<\/a>
J56<\/strong>
Bender, D., Barari, A., 2023, \u201cUsing 3D Density-Gradient Vectors in Evolutionary Topology Optimization to Find the Build Direction for Additive Manufacturing\u201d, Journal of Manufacturing and Materials Processing, Volume 7, Issue 1, https:\/\/doi.org\/10.3390\/jmmp7010046<\/a>
J55<\/strong>
Clarke, K. M., Barari, A., Hogue, A., & Dubrowski, A., 2024, \u201cUsing a Delphi Method Approach to Select Theoretical Underpinnings of Crowdsourcing and Rank Their Application to a Crowdsourcing App\u201d, Simulation in healthcare: The journal of the Society for Simulation in Healthcare, Volume 19, Issue 2, Pages 65-74, https:\/\/doi.org\/10.1097\/SIH.0000000000000719<\/a>
J54<\/strong>
Clarke, K. M., Barari, A., Hogue, A., & Dubrowski, A., 2023, \u201cApplying and Testing a Crowdsourcing Platform to Support Home-Based Simulation\u201d, Simulation in healthcare: The journal of the Society for Simulation in Healthcare, Volume 18, Issue 1, Pages 71\u201372, https:\/\/doi.org\/10.1097\/SIH.0000000000000714<\/a>
J53<\/strong>
Lotfizarei Z., Mostafapour A., Barari A., Jalili A., Patterson A. E., 2022, \u201cOverview of debinding methods for parts manufactured using powder material extrusion\u201d, Additive Manufacturing, Volume 61, 103335, https:\/\/doi.org\/10.1016\/j.addma.2022.103335<\/a>
J52<\/strong>
Bondoc A., Tayefeh, M., Barari, A., 2022, \u201cLearning phase in a LIVE Digital Twin for predictive maintenance\u201d, Autonomous Intelligent Systems, Volume 2, No. 13, https:\/\/doi.org\/10.1007\/s43684-022-00028-0<\/a>
J51<\/strong>
Rosso Jr, R., Tsuzuki, M., Barari, A., Macchi, M., 2022, \u201cTransition towards Smart Factories\u201d, International Journal of Computer Integrated Manufacturing, Volume 35, Nos. 4\u20135, Pages 341\u2013344, https:\/\/doi.org\/10.1080\/0951192X.2022.2080451<\/a>
J50<\/strong>
Alizadeh, A., Mahboubkhah, M., Barari, A., 2022, \u201cCross-sensitivity control in a novel four-component milling dynamometer for simultaneous measurement of tri-axial forces and torque\u201d, Measurement, Volume 191, No. 15, 110788, https:\/\/doi.org\/10.1016\/j.measurement.2022.110788<\/a>
J49<\/strong>
Duran C. G., Sato A., Ueda E., Takiomoto R., Gohari H., Barari A., Martins T. C., Tsuzuki M. S.G., 2021, \u201cUsing Feedback Strategies in Simulated Annealing with Crystallization Heuristic and Applications\u201d, Applied Sciences, Volume 11, No. 24, 111814, https:\/\/doi.org\/10.3390\/app112411814<\/a>
J48<\/strong>
Berry, C., Tsuzuki M. S.G, Barari, A., 2022, \u201cData Analytics for Noise Reduction in Optical Metrology of Reflective Planar Surfaces\u201d, Machines, Volume 10, No. 25, https:\/\/doi.org\/10.3390\/machines10010025<\/a>
J47<\/strong>
DeBoer, B., Barari, A., Nonoyama, M., Dubrowski, A., Zaccagnini, M., Hosseini, A., 2021, \u201cPreliminary design and development of a mechanical ventilator using industrial automation components for rapid deployment during the COVID-19 pandemic\u201d, Cureus, Volume 13, Issue 12, https:\/\/doi.org\/10.7759\/cureus.20386<\/a>
J46<\/strong>
Aliakbari M., Mahboubkhah M., Sadaghia M., Barari, A., Akbari, S., 2021, \u201cComputer Integrated Work-space Quality-Improvement of the C4 Parallel-Robot-CMM Based on Kinematic Error Model for Using in Intelligent Measuring\u201d, International Journal of. Computer Integrated Manufacturing, Volume 37, Issue 3, Pages 304-323, https:\/\/doi.org\/10.1080\/0951192X.2021.1992654<\/a>
J45<\/strong>
Najafabadi H. T., Goto T. G., Falheiro M. S., Martins T. C., Barari A., Tsuzuki M. S.G., 2021, \u201cSmart Topology Optimization Using Adaptive Neighborhood Simulated Annealing\u201d, Applied Sciences, Volume 11, No. 11, 5257, https:\/\/doi.org\/10.3390\/app11115257<\/a>
J44<\/strong>
Gohari, H., Barari, A., 2021, \u201cFinding Optimal Correspondence Sets for Large Digital Metrology Point Clouds Using Anisotropic Diffusion Analogy\u201d, International Journal of Computer Integrated Manufacturing, Volume 35, Issue 4-5, Pages 462-482, https:\/\/doi.org\/10.1080\/0951192X.2021.1948103<\/a>
J43<\/strong>
Akbari, S., Mahboubkhah, M., Karimi, D., Barari, A., 2021, \u201cExperimental and analytical evaluation of tool path error using computer integrated nonlinear kinematical modeling for a 4DOF parallel milling machine\u201d, International Journal of Computer Integrated Manufacturing, Volume 35, Issue 4-5, Pages 527-555, https:\/\/doi.org\/10.1080\/0951192X.2021.1925968<\/a>
J42<\/strong>
Barari, A., Tsuzuki, M., S. G., Cohen, Y., and Macchi, M., 2021, \u201cIntelligent manufacturing Systems Towards Industry 4.0 Era\u201c, Journal of Intelligent Manufacturing, Volume 32, Pages 1793-1796, https:\/\/doi.org\/10.1007\/s10845-021-01769-0<\/a>
J41<\/strong>
Gohari, H., Barari, A., Kishawy, H., 2021, \u201cAdaptive Variable Layer Thickness and Perimetral Offset Planning for Layer-based Additive Manufacturing Processes\u201d, International Journal of Computer Integrated Manufacturing, Volume 34, Issue 9, Pages 964-974, https:\/\/doi.org\/10.1080\/0951192X.2021.1946854<\/a>
J40<\/strong>
Umaras, E., Barari, A., Tsuzuki, M., S. G., 2021, \u201cHeavy Vehicles Brake Drums – An Accurate Evaluation on Thermal Loads in Sever Service Conditions \u201c, International Journal of Automotive Technology, Volume 22, Issue 1, Pages 371\u2013382, https:\/\/doi.org\/10.1007\/s12239-021-0035-1<\/a>
J39<\/strong>
Umaras, E., Barari, A., Tsuzuki, M., 2020, \u201cTolerance analysis based on Monte Carlo simulation: a case of an automotive water pump design optimization\u201d, Journal of Intelligent Manufacturing, Volume 32, pp 1883-1897, https:\/\/doi.org\/10.1007\/s10845-020-01695-7<\/a>
J38<\/strong>
Doria, F. F., Lima, F. B. C. L., Sato, A. K., Takimoto, R. Y., Barari, A., Tsuzuki F. S. G., Tsuzuki, M. S. G., 2020, \u201cDetermina\u00e7\u00e3o das Linhas do Campo de Futebol para sua Reconstru\u00e7\u00e3o 3D\u201d, Anais da Sociedade Brasileira de Autom\u00e1tica, Volume 2, Issue 1, https:\/\/doi.org\/10.48011\/asba.v2i1.1541<\/a>
J37<\/strong>
Tanabi, N., Duran, G. C., Scaff, W., Tsuzuki, M. S. G., Barari, A., 2020, \u201cOtimiza\u00e7\u00e3o Aerodin\u00e2mica de Aerof\u00f3lio em Escoamento Compress\u00edvel pelo M\u00e9todo Adjunto\u201d, Anais da Sociedade Brasileira de Autom\u00e1tica, Volume 2, Issue 1, https:\/\/doi.org\/10.48011\/asba.v2i1.1551<\/a>
J36<\/strong>
McCarthy, R., Gino, B., d’Entremont, P., Barari, A., Renouf, T. S., 2020, \u201cThe Importance of Personal Protective Equipment Design and Donning and Doffing Technique in Mitigating Infectious Disease Spread: A Technical Report\u201d, Cureus, Volume 12, Issue 12, https:\/\/doi.org\/10.7759\/cureus.12084<\/a>
J35<\/strong>
Mahboubkhah, M., Barari, A., 2019, \u201cDesign and development of a novel 4-DOF parallel kinematic coordinate measuring machine (CMM)\u201d, International Journal of Computer Integrated Manufacturing, Volume 32, Issue 8, Pages 750-760, https:\/\/doi.org\/10.1080\/0951192X.2019.1610576<\/a>
J34<\/strong>
Berry, C., Barari A., 2018, \u201cClosed-Loop Coordinate Metrology for Hybrid Manufacturing System\u201d, IFAC-PapersOnLine, Volume 51, Issue 11, 2018, Pages 752-757, https:\/\/doi.org\/10.1016\/j.ifacol.2018.08.409<\/a>
J33<\/strong>
Lalehpour, A., Barari, A., 2018, \u201cA More Accurate Analytical Formulation of Surface Roughness in Layer-Based Additive Manufacturing to Enhance the Product’s Precision\u201d, International Journal of Advanced Manufacturing Technology, Volume 96, Pages 3793\u20133804, https:\/\/doi.org\/10.1007\/s00170-017-1448-x<\/a>
J32<\/strong>
Gohari, H., Barari, A., Kishawy, H., 2018, \u201cAn Efficient Methodology for Slicing NURBS Surfaces Using Multi-step Methods\u201d, International Journal of Advanced Manufacturing Technology, Volume 95, Pages 3111\u20133125, https:\/\/doi.org\/10.1007\/s00170-017-1219-8<\/a>
J31<\/strong>
Lalehpour, A., Janeteas, C., Barari, A., 2017, \u201cSurface roughness of FDM parts after post-processing with acetone vapor bath smoothing process\u201d, International Journal of Advanced Manufacturing Technology, Volume 95, Issue 1\u20134, Pages 1505\u20131520, https:\/\/doi.org\/10.1007\/s00170-017-1165-5<\/a>
J30<\/strong>
Lalehpour, A., Berry, C., Barari, A., 2017, \u201cAdaptive data reduction with neighbourhood search approach in coordinate measurement of planar surfaces\u201d, Journal of Manufacturing Systems, Volume 45, Pages 28-47, http:\/\/dx.doi.org\/10.1016\/j.jmsy.2017.07.001<\/a>
J29<\/strong>
Lalehpour, A., Barari, A., 2017, \u201cDeveloping Skin Model in Coordinate Metrology Using a Finite Element Method\u201d, Measurements, Volume 109, Pages 149-159, https:\/\/doi.org\/10.1016\/j.measurement.2017.05.056<\/a>
J28<\/strong>
Jamiolahmadi, S., Barari, A., 2018, \u201cStudy of Detailed Deviation Zone Considering Coordinate Metrology Uncertainty and Manufacturing Accuracy\u201d, Measurements, Volume 126, Pages 433-457, http:\/\/dx.doi.org\/10.1016\/j.measurement.2016.12.032<\/a>
J27<\/strong>
Barari, A., Kishawy. H., Kaji. F., Elbestawi, M. A., 2016, \u201cOn the Surface Quality of Additive Manufactured Parts\u201d, International Journal of Advanced Manufacturing Technology, Volume 89, No. 5-8, Pages 1969-1974, http:\/\/dx.doi.org\/10.1007\/s00170-016-9215-y<\/a>
J26<\/strong>
Gohari, H., Barari, A., Kishawy, H., 2016, \u201cUsing Multistep Methods in Slicing 2 \u00bd Dimensional Parametric Surfaces for Additive Manufacturing Applications\u201d, IFAC-PapersOnLine, Volume 49, Issue 31, Pages 67-72, https:\/\/doi.org\/10.1016\/j.ifacol.2016.12.163<\/a>
J25<\/strong>
Lalehpour, A., Barari, A., 2016, \u201cPost processing for Fused Deposition Modeling Parts with Acetone Vapour Bath\u201d, IFAC-PapersOnLine, Volume 49, Issue 31, Pages 42-48, https:\/\/doi.org\/10.1016\/j.ifacol.2016.12.159<\/a>
J24<\/strong>
Gohari, H., Barari, A., 2016, \u201cUsing Perona\u2010Malik Anisotropic Heat Diffusion for Data Reduction in Coordinate Metrology\u201d, Journal of the CMSC, Volume 11, No. 2, Autumn 2016, Pages 18-26.
J23<\/strong>
Gohari, H., Barari, A., 2016, \u201cA Quick Deviation Zone Fitting in Coordinate Metrology of NURBS Surfaces Using Principle Component Analysis\u201d, Measurement, Volume 92, October 2016, Pages 352-364, http:\/\/dx.doi.org\/10.1016\/j.measurement.2016.05.050<\/a>
J22<\/strong>
Ghani, A.O., Agelin-chaab, M., Barari, A., 2015, \u201cApplication Framework for Aero-based Design Optimization of Passenger Cars using NURBS\u201d, Journal of Applied Mechanical Engineering, Volume4, issue 6, 8 pages, http:\/\/dx.doi.org\/10.4172\/2168-9873.1000188<\/a>
J21<\/strong>
Barari, A., Jamiolahmadi, S., 2015, \u201cConvergence of A Finite Difference Approach for Detailed Deviation Zone Estimation in coordinate metrology\u201d, Acta IMEKO, Volume 4, No. 4, Pages 20\u201025, http:\/\/dx.doi.org\/10.21014\/acta_imeko.v4i4.271<\/a>
J20<\/strong>
Askari, H., Esmailzadeh, E., Barari, A., 2015, \u201cA Unified Approach for Nonlinear Vibration Analysis of Curved Structures using Non-Uniform Rational B-Spline Representation\u201d, Journal of Sound and Vibration, Volume 353, 29 September 2015, Pages 292\u2013307, http:\/\/dx.doi.org\/10.1016\/j.jsv.2015.05.022<\/a>
J19<\/strong>
Jamiolahmadi, S., Barari, A., 2014, \u201cSurface Topography of Additive Manufacturing Parts Using a Finite Difference Approach\u201d, ASME Transactions \u2013 Journal of Manufacturing Science and Engineering, Volume 136, No 6, pages 061009-1:8, http:\/\/dx.doi.org\/10.1115\/1.4028585<\/a>
J18<\/strong>
Sikder, S., Barari, A., Kishawy, H., 2015,\u201cGlobal Adaptive Slicing of NURBS Based Sculptured Surface for Minimum Texture Error in Rapid Prototyping\u201d, Rapid Prototyping Journal, Volume 21, Issue 6, Pages 649-661, http:\/\/dx.doi.org\/10.1108\/RPJ-09-2013-0090<\/a>
J17<\/strong>
Diba, F., Barari, A., Esmailzadeh, E., 2014,\u201cHandling and Safety Enhancement of Racing Cars Using Active Aerodynamic Systems\u201d, Journal of Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility, Volume 52, Issue 9, Pages 1171-1190, http:\/\/dx.doi.org\/10.1080\/00423114.2014.930158<\/a>
J16<\/strong>
Barari, A., Kaji, F., 2014, \u201cThe Uncertainty of Coordinate Metrology as a Function of Sampling Strategy\u201d, Journal of the CMSC, Volume 9, No 1, Spring 2014, Pages 22-27.
J15<\/strong>
Tebby, S., Barari, A. Esmailzadeh, E., 2014, \u201cDevelopment of Optimized Preliminary Vehicle Structural Model Using Simple Structural Beams-Frames (SSB) and Sub-Structural Analysis\u201d, Journal of Computer-Aided Design and Applications, Volume 11, No. 5, Pages 544-551, http:\/\/dx.doi.org\/10.1080\/16864360.2014.902685<\/a>
J14<\/strong>
Heroux, A., Tutunea-Fatan, O. R., Salisbury, S. P., Barari, A., 2014, \u201cMinimization of Bone Removal Through Optimal Humeral Implant Alignment in Total Elbow Arthroplasty\u201d, Journal of Computer-Aided Design and Applications, Volume 11, No. 4, Pages 478-492, http:\/\/dx.doi.org\/10.1080\/16864360.2014.881192<\/a>
J13<\/strong>
Barari, A., Mordo, S., 2013, \u201cEffect of Sampling Strategy on Uncertainty and Precision of Flatness Inspection Studied by Dynamic Minimum Deviation Zone Evaluation”, International Journal of Metrology and Quality Engineering, Volume 4, Issue 01, Pages 3-8, http:\/\/dx.doi.org\/10.1051\/ijmqe\/2012039<\/a>
J12<\/strong>
Barari, A., 2013, \u201cTolerance allocation Based on the Minimum Deformation Zone of Finite Element Structural Frame Analysis\u201d, Journal of Computer-Aided Design and Applications, Volume 10, No. 4, Pages 629-641, http:\/\/dx.doi.org\/10.3722\/cadaps.2013.629-641<\/a>
J11<\/strong>
Tebby, S., Barari, A. Esmailzadeh, E., 2013, \u201cOptimization of Vehicle Structure Considering Torsion Stiffness Using Simple Structural Beam Frame-Approach\u201d, Journal of Computer-Aided Design and Applications, Volume 10, No. 3, Pages 413-426, http:\/\/dx.doi.org\/10.3722\/cadaps.2013.413-426<\/a>
J10<\/strong>
Barari, A., 2013, \u201cInspection of the Machined Surfaces Using Manufacturing Data\u201d , Journal of Manufacturing Systems, Volume 32, Issue 1, Pages 107-113, http:\/\/dx.doi.org\/10.1016\/j.jmsy.2012.07.011<\/a>
J09<\/strong>
Barari, A., 2012, \u201cA Best-Fit Method to Maximize Conformance to Tolerance in Surface Coordinate Metrology\u201d, Journal of the CMSC, Volume 7, No. 1, Spring 2012, Pages 20-27.
J08<\/strong>
Platanitis, G., Pop-Iliev, R., Barari, A., 2012, \u201cDevelopment of a DSM-Based Methodology in an Academic Setting\u201d, ASME Transactions- Journal of Mechanical Design, Vol. 134, Issue 2, Pages 021007-1 :11, http:\/\/dx.doi.org\/10.1115\/1.4005591<\/a>
J07<\/strong>
Barari, A., 2011, \u201cAutomotive\u2010 Body Inspection Uncertainty Due to Computational Complexity\u201d, International Journal of Vehicle Design, Volume 57, No. 2\/3, Pages 230-241, http:\/\/dx.doi.org\/10.1504\/IJVD.2011.044725<\/a>
J06<\/strong>
Tebby, S., Esmailzadeh, E., Barari, A., 2011, \u201cMethods to Determine Torsion Stiffness in an Automotive Chassis\u201d, Journal of Computer-Aided Design and Applications, PACE Special Issue, Volume 1, Pages 67-75, http:\/\/dx.doi.org\/10.3722\/cadaps.2011.PACE.67-75<\/a>
J0<\/strong>5<\/strong>
Barari, A., Pop-Iliev R., 2009, \u201cReducing Rigidity by Implementing Closed-Loop Engineering in Adaptable Design and Manufacturing Systems\u201d, Journal of Manufacturing Systems, Volume 28, Issues 2-3, Pages 47-54, July 2009, http:\/\/dx.doi.org\/10.1016\/j.jmsy.2009.04.003<\/a>
J04<\/strong>
Barari, A., ElMaraghy H. A., ElMaraghy W. A., 2009,\u201cDesign For Machining of Sculptured Surfaces – A Computational platform\u201d, ASME Transactions- Journal of Computing and Information Science in Engineering , Volume 9, Issue 3, June 2009 , Pages 021006-1:13, http:\/\/dx.doi.org\/10.1115\/1.3130143<\/a>
J03<\/strong>
Barari, A., ElMaraghy H. A., Orban P., 2009, \u201cNURBS representation of estimated surfaces resulting from machining errors\u201d, International Journal of Computer Integrated Manufacturing, Volume 22, Issue 5, May 2009, Pages 395 \u2013 410, http:\/\/dx.doi.org\/10.1080\/09511920802392730<\/a>
J02<\/strong>
Barari, A., ElMaraghy H. A., Knopf G. K., 2007, \u201cSearch – Guided sampling to reduce uncertainty of minimum zone estimation\u201d, ASME Transactions- Journal of Computing and Information Science in Engineering, Volume 7, Issue 4, Pages 360-371, http:\/\/dx.doi.org\/10.1115\/1.2798114<\/a>
J01<\/strong>
ElMaraghy H. A., Barari, A., Knopf G. K., 2004, \u201cIntegrated inspection and machining for maximum conformance to design tolerances\u201d, CIRP Annals-Manufacturing Technology, Volume 53, No 1, Pages 411-416, http:\/\/dx.doi.org\/10.1016\/S0007-8506(07)60728-8<\/a><\/td><\/tr>
<\/td><\/tr><\/tbody><\/table><\/figure>\n<\/div><\/details><\/div>\n\n\n\n
Conference Papers<\/summary>
\n

<\/p>\n\n\n\n

C131<\/strong>
Schneidler J., Berry C., Barari A., 2021, \u201cImproving 3D Printing Geometric Accuracy Using Design of Experiments on Process Parameters in Fused Filament Fabrication (FFF)\u201d, The 14th<\/sup> IEEE International Conference on Industry Application, S\u00e3o Paulo, Brazil, August 16-18, 2021.<\/em>
C130<\/strong>
Seyedi Sahebari S. M., Barari A., Abou Ziki J., 2021, \u201cNeural Network Signal Processing  in Spark Assisted Chemical Engraving (SACE) Micromachining\u201d, The 14th<\/sup> IEEE International Conference on Industry Applications, S\u00e3o Paulo, Brazil, August 16-18, 2021.<\/em>
C129<\/strong>
Zonta T., Selvanathan J., Patel J., Wilson K., Kaura H., Berry C., Barari A., 2021, \u201cAutonomous Snowblower Utilizing Internet of Things for Minimal Power Consumption\u201d, The 14th<\/sup> IEEE International Conference on Industry Applications, S\u00e3o Paulo, Brazil, August 16-18, 2021.<\/em>
C128<\/strong>
Narang M., Rana M., Patel J., D\u2019souza S., Onyechie P., Berry C., Barari A., 2021, \u201cFighting COVID: An Autonomous Indoor Cleaning Robot (AICR) Supported by Artificial Intelligence and Vision for Dynamic Air Disinfection\u201d, The 14th<\/sup> IEEE International Conference on Industry Applications, S\u00e3o Paulo, Brazil, August 16-18, 2021.<\/em>
C127<\/strong>
Geran Malek N., Tayefeh M., Bender D., Barari A., 2021, \u201cLIVE Digital Twin for Smart Maintenance in Structural Systems\u201d, 17th IFAC Symposium on Information Control Problems in Manufacturing (INCOM 2021), Budapest, Hungary, June 7-9, 2021.<\/em>
C126<\/strong>
Lotfi Z.. Mostafapur A., Barari A., 2021, \u201cProperties of Metal Extrusion Additive Manufacturing and Its Application in Digital Supply Chain Management\u201d, 17th IFAC Symposium on Information Control Problems in Manufacturing (INCOM 2021), Budapest, Hungary, June 7-9, 2021.<\/em>
C125<\/strong>
Gohari H., Barari A., 2021, \u201cImproving Geometric Tolerances in 3D Printable Pneumatic Valves Designed for Respiratory Mechanical Ventilators Amid Covid-19 Pandemic\u201d, 17th IFAC Symposium on Information Control Problems in Manufacturing (INCOM 2021), Budapest, Hungary, June 7-9, 2021.<\/em>
C124<\/strong>
Ghanbary Kalajahi E., Mahboubkhah M., Barari A., 2021, \u201cNumerical Versus Analytical Direct Kinematics in a Novel 4-DOF Parallel Robot Designed for Digital Metrology\u201d, 17th IFAC Symposium on Information Control Problems in Manufacturing (INCOM 2021), Budapest, Hungary, June 7-9, 2021.<\/em>
C123<\/strong>
Ghanbary Kalajahi E., Mahboubkhah M., Barari A., 2021, \u201cReducing Noises in Digital Surface Inspection Using a Data Clustering Approach\u201d, 17th IFAC Symposium on Information Control Problems in Manufacturing (INCOM 2021), Budapest, Hungary, June 7-9, 2021.<\/em>
C122<\/strong>
Kenji Ueda, E., Barari, A., Tsuzuki, M. S. G., 2021, \u201cDetermination of Open Boundaries in Point Clouds with Symmetry\u201d, Proceedings of the 19th International Conference on Geometry and Graphics (ICGG 2020), S\u00e3o Paulo, Brazil, 9-13 August 2020, Springer,<\/em> 332-342.<\/em>
C121<\/strong>
Duran, G. C., Sato, A. K., Tanabi, N., Nasiri, H., Takimoto, R. Y., Barari, A., Thiago, M. C., Tsuzuki, M., S. G., 2021, \u201cFramework for Electrical Impedance Tomography Forward Problem with Non-uniform Electrodes Distribution\u201d, Proceedings of the 19th International Conference on Geometry and Graphics (ICGG 2020), S\u00e3o Paulo, Brazil, 9-13 August 2020, Springer,<\/em> 320-331.<\/em>
C120<\/strong>
Tanabi, N., L., Barari, A., Vakilipour, S., Tsuzuki F. S. G., Tsuzuki, M. S. G., 2021, \u201cInverse Designing Airfoil Aerodynamics in Compressible Flow by Target Pressure Distribution\u201d, Proceedings of the 19th International Conference on Geometry and Graphics (ICGG 2020), S\u00e3o Paulo, Brazil, 9-13 August 2020, Springer,<\/em> 308-319.<\/em>
C119<\/strong>
Najafabadi, H. R., Tiago, G. C., Thiago, M. C., Barari, A., Tsuzuki, M. S. G., 2021, \u201cMulti-objective Topology Optimization Using Simulated Annealing Method\u201d, Proceedings of the 19th International Conference on Geometry and Graphics (ICGG 2020), S\u00e3o Paulo, Brazil, 9-13 August 2020, Springer,<\/em> 343-353.<\/em>
C118<\/strong>
Doria, F. F., Lima, F. B. C. L., Sato, A. K., Takimoto, R. Y., Barari, A., Tsuzuki F. S. G., Tsuzuki, M. S. G., 2021, \u201cSoccer Field Lines Determination and 3D Reconstruction\u201d, Proceedings of the 19th International Conference on Geometry and Graphics (ICGG 2020), S\u00e3o Paulo, Brazil, 9-13 August 2020, Springer,<\/em> 568-579.<\/em>
C117<\/strong>
Filho, F. A., Munhoz, J. V., Takimoto, R. Y., Barari, A., Tsuzuki, M., S., 2021, \u201cHuman Thorax Parametric Reconstruction Using Computer Vision\u201d, Proceedings of the 19th International Conference on Geometry and Graphics (ICGG 2020), S\u00e3o Paulo, Brazil, 9-13 August 2020, Springer,<\/em> 580-591.<\/em>
C116<\/strong>
Gohari, H., Bender D., Barari, A., 2020, \u201c3D Printable Pneumatic Valves for Rapidly Manufacturable Mechanical Ventilator Amid Covid-19 Outbreak\u201d, 2020 IEEE 10th International Conference Nanomaterials: Applications & Properties (NAP), Sumy, Ukraine, 9-13 November 2020.<\/em>
C115<\/strong>
Gohari, H., Barari, A., 2020, \u201cProducing High Precision Additive Manufacturing Parts by Direct Printing of NURBS Surfaces\u201d, 2020 IEEE 10th International Conference Nanomaterials: Applications & Properties (NAP), Sumy, Ukraine, 9-13 November 2020.<\/em>
C114<\/strong>
Kenji Ueda, E., Barari, A., Tsuzuki, M., Sato, A., 2020, \u201cDetection of Defected Zone Using 3D Scanning Data to Repair Worn Turbine Blades\u201d, 21st IFAC World Congress, Berlin, Germany, Canada, 11-17 July 2020.<\/em>
C113<\/strong>
Gohari, H., Barari, A., Kishawy, H., Tsuzuki, M., 2020, \u201cEffect of Direct Slicing on Precision Additive Manufacturing\u201d, 21st IFAC World Congress, Berlin, Germany, 11-17 July 2020.<\/em>
C112<\/strong>
Mahboubkhah, M., Akhbari, S., Barari A., 2019, \u201cSelf-Configuration Machining capability of a 4-DOF parallel kinematic machine tool with nonsingular workspace for Intelligent Manufacturing Systems\u201d, 13th IFAC Workshop on Intelligent Manufacturing Systems, Oshawa, Ontario, Canada, 12-14 August 2019.<\/em>
C111<\/strong>
Mahboubkhah, M., Aliakbari, M., Barari A., 2019, \u201cAn Intelligent Self-Calibrating 4-DOF Parallel Robot for Precise Geometric Data Collection in Digital Manufacturing\u201d, 13th IFAC Workshop on Intelligent Manufacturing Systems, Oshawa, Ontario, Canada, 12-14 August 2019.<\/em>
C110<\/strong>
Bender D., Barari A., 2019, \u201cIntegrated Digital Design and Manufacturing for 3D Printing Technologies\u201d, 13th IFAC Workshop on Intelligent Manufacturing Systems, Oshawa, Ontario, Canada, 12-14 August 2019.<\/em>
C109<\/strong>
Gohari Bahabadi, H., Barari A., Kishawy, H., Tsuzuki, M., 2019, \u201cIntelligent Process Planning for Additive Manufacturing\u201d, 13th IFAC Workshop on Intelligent Manufacturing Systems, Oshawa, Ontario, Canada, 12-14 August 2019.<\/em>
C108<\/strong>
Jankovics, D., Barari A., 2019, \u201cCustomization of Automotive Structural Components using Additive Manufacturing and Topology Optimization\u201d, 13th IFAC Workshop on Intelligent Manufacturing Systems, Oshawa, Ontario, Canada, 12-14 August 2019.<\/em>
C107<\/strong>
Gohari Bahabadi, H., Berry, C., Barari A., 2019, \u201cA Digital Twin for Integrated Inspection System in Digital Manufacturing\u201d, 13th IFAC Workshop on Intelligent Manufacturing Systems,  Oshawa, Ontario, Canada, 12-14 August 2019.<\/em>
C106<\/strong>
Umaras, E.,  Barari, A., Tsuzuki, M., 2019, \u201cIntelligent Design Tolerance Allocation for Optimum Adaptability to Manufacturing Using a Monte Carlo Approach\u201d, 13th IFAC Workshop on  Intelligent Manufacturing Systems,  Oshawa, Ontario, Canada, 12-14 August 2019.<\/em>
C105<\/strong>
Berry, C., Barari A., 2019, \u201cCyber-Physical System Utilizing Work-Piece Memory in Digital Manufacturing\u201d, 13th IFAC Workshop on  Intelligent Manufacturing Systems,  Oshawa, Ontario, Canada, 12-14 August 2019.<\/em>
C104<\/strong>
Berry, C., Barari A., 2019, \u201cNoise Filtration of 3D Scanned Data Points in Metrology of Highly Reflective Surfaces\u201d, The<\/em> 35nd<\/sup> Coordinate Metrology Systems Conference (CMSC), CMSC 2019, July 22 – 26, 2019, Orlando, Florida.<\/em>
C103<\/strong>
Gohari Bahabadi, H., Barari A., 2019, \u201cGEOMETRIC COMPLEXITY ESTIMATION OF CONTINUOUS SURFACES FOR FITTING PROCESSES\u201d, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC\/CIE 2019, Aug 18-21, 2019, Anaheim, CA, USA.<\/em>
C102<\/strong>
Bender D., Barari A., 2019, \u201cDIRECT SOLID ELEMENT SLICING IN TOPOLOGY OPTIMIZATION FOR ADDITIVE MANUFACTURING\u201d, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC\/CIE 2019, Aug 18-21, 2019, Anaheim, CA, USA.<\/em>
C101<\/strong>
Jankovics, D., Agelin-Chaab, M., Barari A., 2019, \u201cDevelopment of a Formula SAE Front Wing with an Emphasis on Additional Aerodynamic Devices\u201d, 27th<\/sup> Annual Conference of the CFD Society of Canada (CFDSC) \u2013 CFD 2019, June 2-5, 2019, London, Canada.
C100<\/strong>
Gohari Bahabadi, H., Barari A., 2019, \u201cAccurate Estimation of Process Parameters in Fused Deposition Modeling\u201d, Canadian Society of Mechanical Engineers (CSME) International Congress \u2013 CSME 2019, June 2-5, 2019, London, Canada.
C99<\/strong>
Berry, C., Barari A., 2019, \u201cGlobal Statistics Based Method for Denoising of Planar Point Clouds\u201d, Canadian Society of Mechanical Engineers (CSME) International Congress \u2013 CSME 2019, June 2-5, 2019, London, Canada.
C98<\/strong>
Bender, D., Barari A., 2019, \u201cMulti-Element Slicing Approach for Intelligent Additive Manufacturing Preprocessing\u201d, Canadian Society of Mechanical Engineers (CSME) International Congress \u2013 CSME 2019, June 2-5, 2019, London, Canada.
C97<\/strong>
Ueda, E. K., Tsuzuki, M. S. G., Barari A., 2018, \u201cPiecewise B\u00b4ezier Curve Fitting of a Point Cloud Boundary by Simulated Annealing\u201d, 13th IEEE\/IAS International Conference on Industry Applications., INDUSCON 2018, November 11-14, 2018, S\u00e3o Paulo, Brazil.<\/em>
C96<\/strong>
Bender D., Barari A., 2018, \u201cOverhanging Feature Analysis for the Additive Manufacturing of Topology Optimized Structures\u201d, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC\/CIE 2018, Aug 26-29, 2018, Quebec City, Quebec, Canada.<\/em>
C95<\/strong>
Jankovics, D., Gohari, H., Tayefeh, M., Barari A., 2018, \u201cDeveloping Topology Optimization with Additive Manufacturing Constraints in ANSYS\u00ae\u201d, 16th IFAC Symposium on Information Control Problems in Manufacturing \u2013 INCOM 2018, June 11-13, 2018 Bergamo, Italy.
C94<\/strong>
Berry, C., Barari A., 2018, \u201cClosed-Loop Coordinate Metrology for Hybrid Manufacturing System\u201d, 16th IFAC Symposium on Information Control Problems in Manufacturing \u2013 INCOM 2018, June 11-13, 2018 Bergamo, Italy.
C93<\/strong>
Jankovics, D., Gohari, H., Barari A., 2018, \u201cConstrained Topology Optimization For Additive Manufacturing Of Structural Components In Ansys\u00ae\u201d, Canadian Society of Mechanical Engineers (CSME) International Congress \u2013 CSME 2018, May 27-30, 2018 Toronto, Canada.
C92<\/strong>
Berry, C., Goodwin, L., Barari A., 2018, \u201cEffect of the Error Propagation Rates in Developing a Skin Model of Measured Surfaces in Coordinate Metrology\u201d, Canadian Society of Mechanical Engineers (CSME) International Congress \u2013 CSME 2018, May 27-30, 2018 Toronto, Canada.
C91<\/strong>
Bender, D., Barari A., 2018, \u201cConvergence Control for Topology Optimization\u201d, Canadian Society of Mechanical Engineers (CSME) International Congress \u2013 CSME 2018, May 27-30, 2018 Toronto, Canada.
C90<\/strong>
Hoursan, H., Ahmadian, M., Kazemiasfeh, R., Barari, A., 2018, \u201cOn the Validity Extent of Linear viscoelastic Models of Human Brain\u201d, Canadian Society of Mechanical Engineers (CSME) International Congress \u2013 CSME 2018, May 27-30, 2018 Toronto, Canada.
C89<\/strong>
Hoursan, H., Moradi, M., Hadjiazim, M., Ahmadian, M., Barari, A., 2018, \u201cA Procedure for Performance Experimental Analysis of a Globe Control Valve\u201d, Canadian Society of Mechanical Engineers (CSME) International Congress \u2013 CSME 2018, May 27-30, 2018 Toronto, Canada.
C88<\/strong>
Berry C., Barari A., 2018, \u201cMinimizing the Undercut Condition in On\u2010Machine Measurement Using Weighted Total Least Squares Fitting\u201d, 7th International Conference of Metrology in Africa \u2013 CAFMET 2018, April 9-12, 2018 \u2013 Marrakesh, Morocco.
C87<\/strong>
Lalehpour A., Barari A., 2017, \u201cA Topology Optimization Paradigm for Additive Manufacturing\u201d, Society of Manufacturing Engineering, The Authority on 3D Printing, Scanning and Additive Manufacturing, May 8-11, 2017 \u2013 Pittsburgh, Pennsylvania,  Rapid + TCT 2017.
C86<\/strong>
Gohari, H., Barari, A., 2017, \u201cA Curvature-Based Direct Slicing Algorithm for Precision Additive Manufacturing\u201d, Society of Manufacturing Engineering, The Authority on 3D Printing, Scanning and Additive Manufacturing, May 8-11, 2017 \u2013 Pittsburgh, Pennsylvania,  Rapid + TCT 2017.
C85<\/strong>
Gohari, H., Barari, A., Kishawy, H., \u201cUsing Multistep Methods in Slicing 2 \u00bd Dimensional Parametric Surfaces for Additive Manufacturing Applications\u201d, The<\/em> 12nd<\/sup> Workshop on<\/em> Intelligent Manufacturing Systems, IMS 2016, December 5-7, 2016, National Instruments, Austin, TX, United States.<\/em>
C84<\/strong>
Lalehpour, A., Barari, A., \u201cPost processing for Fused Deposition Modeling Parts with Acetone Vapour Bath\u201d, The<\/em> 12nd<\/sup> Workshop on<\/em> Intelligent Manufacturing Systems, IMS 2016, December 5-7, 2016, National Instruments, Austin, TX, United States.<\/em>
C83<\/strong>
Gohari, H., Barari, A., \u201cA New Data Reduction Approach in Coordinate Metrology Using Perona\u2010Malik Anisotropic Heat Diffusion\u201d, The<\/em> 32nd<\/sup> Coordinate Metrology Systems Conference (CMSC), CMSC 2016, July 25-29, 2016, Nashville, TN, United States.<\/em>
C82<\/strong>
Berry, C., Lalehpour, A., Barari, A., \u201cDynamic Point Selection Strategy In Coordinate Metrology of Flat Surfaces\u201d, XII-th INTERNATIONAL SCIENTIFIC CONFERENCE, Coordinate Measuring Technique, CMT 2016, April 18 – 20 , 2016, Szczyrk,  Poland.<\/em>
C81<\/strong>
Gohari, H., Barari, A., \u201cProper Initial Condition for Deviation Zone Evaluation of a Freeform Surface Using  Principle Component Analysis\u201d, XII-th INTERNATIONAL SCIENTIFIC CONFERENCE, Coordinate Measuring Technique, CMT 2016, April 18 – 20 , 2016, Szczyrk,  Poland.<\/em>
C80<\/strong>
Lalehpour, A., Berry, C., Barari, A., \u201cAn experimental study on the effect of sampling strategy in coordinate measurement of planar surfaces\u201d, XII-th INTERNATIONAL SCIENTIFIC CONFERENCE, Coordinate Measuring Technique, CMT 2016, April 18 – 20 , 2016, Szczyrk,  Poland.<\/em>
C79<\/strong>
Barari, A., Lalehpour, A., Jamiolahmadi, S., \u201cA Finite Element Approach to Estimate the Detailed Deviation Zone in Coordinate Metrology\u201d, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC\/CIE 2015, Aug 2-5, 2015, Boston, MA, United States.<\/em> DOI: http:\/\/dx.doi.org\/10.1115\/DETC2015-48008<\/a>
C78<\/strong>
Barari, A., Kaji, F., \u201cModelling of Cusp Geometry in Additive Manufacturing Parts Using a Piece-Wise Polynomial\u201d, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC\/CIE 2015, Aug 2-5, 2015, Boston, MA, United States.<\/em>
C77<\/strong>
Jamiolahmadi, S., Barari, A., \u201cConvergence Study of Genetic Programming Approach to Estimate Surface Integrity on Additive Manufacturing Parts\u201d, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC\/CIE 2015, Aug 2-5, 2015, Boston, MA, United States.<\/em> DOI: http:\/\/dx.doi.org\/10.1115\/DETC2015-47997<\/a>
C76<\/strong>
Fallah, A., Ahmadian, M.T., Barari, A., \u201cNonlinear Free Vibration of Piezoelectric Functionally Graded Beams in Thermal Environment\u201d, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC\/CIE 2015, Aug 2-5, 2015, Boston, MA, United States.<\/em> DOI: http:\/\/dx.doi.org\/10.1115\/DETC2015-46163<\/a>
C75<\/strong>
Barari, A., Lalehpour, A., \u201cEstimation of the Detailed Deviation Zone in Coordinate Metrology Using a Finite Element Solution\u201d, The 31st Coordinate Metrology Systems Conference (CMSC), CMSC 2015, July 20-24, 2015, Hollywood, MI, United States.<\/em>
C74<\/strong>
Barari, A., Jamiolahmadi, S., \u201cA Genetic Programming Approach to Model Detailed Surface Integrity of Additive Manufacturing Parts\u201d, IFAC Symposium on Information Control in Manufacturing (INCOM 2015), May 10-13, 2015, Ottawa, Canada.<\/em> DOI: http:\/\/dx.doi.org\/10.1016\/j.ifacol.2015.06.437<\/a>
C73<\/strong>
Marchesi, T., Lahuerta, R., Silva, E., Tsuzuki, M., Martins, T., Barari, A., Wood, I., \u201cTopologically Optimized Diesel Engine Support Manufactured with Additive Manufacturing\u201d, IFAC Symposium on Information Control in Manufacturing (INCOM 2015), May 10-13, 2015, Ottawa, Canada.<\/em> DOI: http:\/\/dx.doi.org\/10.1016\/j.ifacol.2015.06.436<\/a>
C72<\/strong>
Barari, A., Kaji, F., \u201cEvaluation of the Surface Roughness of Additive Manufacturing Parts Based on the Modeling of Cusp Geometry\u201d, IFAC Symposium on Information Control in Manufacturing (INCOM 2015), May 10-13, 2015, Ottawa, Canada.<\/em> DOI: http:\/\/dx.doi.org\/10.1016\/j.ifacol.2015.06.157<\/a>
C71<\/strong>
Martins, T., Tsuzuki, M., Barari, A., 2014, \u201cSampling Plan for Coordinate Metrology Using Uncertainty Analysis\u201d, ASME International Mechanical Engineering Congress & Exposition, IMECE 2014,November 14-20, 2014, Montreal, Canada.<\/em>
C70<\/strong>
Wood, I., Barari, A., Esmailzadeh, E., 2014, \u201cUsing Simple Structural Beam Model to Optimize for Bending Stiffness and Vibration in Automotive Structures\u201d, ASME International Mechanical Engineering Congress & Exposition, IMECE 2014,November 14-20, 2014, Montreal, Canada.<\/em> DOI: http:\/\/dx.doi.org\/10.1115\/IMECE2014-37992<\/a>
C69<\/strong>
Mordo, S., Popravko, V., Barari, A., 2014, \u201cSurface tribology Study Resulting by Diamond-like Carbon Coating\u201d, ASME International Mechanical Engineering Congress & Exposition, IMECE 2014, November 14-20, 2014, Montreal, Canada.<\/em> DOI: http:\/\/dx.doi.org\/10.1115\/IMECE2014-38776<\/a>
C68<\/strong>
Jamiolahmadi, S., Barari, A., 2014, \u201cSurface Roughness Model for Additive Manufacturing Parts Using Finite Difference Method\u201d, ASME International Mechanical Engineering Congress & Exposition, IMECE 2014, November 14-20, 2014, Montreal, Canada.<\/em>
C67<\/strong>
Jamiolahmadi, S., Barari, A., 2014, \u201cValidation of Using Finite Difference Method to Estimate Detailed Deviation Zone in Coordinate Metrology\u201d, Advanced Mathematical and Computational Tools in Metrology and Testing (AMCTM 2014)<\/em>, D.I.Mendeleyev Institute for Metrology (VNIIM),<\/em> 9 and 10-12 September, 2014, St.Petersburg, Russia.<\/em>
C66<\/strong>
Saadatnia, Z., Barari, A., Esmailzadeh, E., 2014, \u201cNonlinear Forced Vibration Analysis of Free-Form Nanotube Conveying Fluid\u201d, The 14th IEEE International Conference on Nanotechnology<\/em>, August 18-22, 2014, Toronto, Canada.<\/em> DOI: http:\/\/dx.doi.org\/10.1109\/NANO.2014.6968150<\/a>
C65<\/strong>
Wood, I., Barari, A., Esmailzadeh, E., 2014, \u201cUsing the Simple Structural Beam (SSB) Model to Optimize and Analyze Automotive Structures for Bending Stiffness and Natural Frequency\u201d, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC\/CIE 2014, Aug 19-22, 2014, Buffalo, NY, United States.<\/em>  DOI: http:\/\/dx.doi.org\/10.1115\/DETC2014-35549<\/a>
C64<\/strong>
Jamiolahmadi, S., Barari, A., 2014, \u201cAn Approach to Estimate the Detailed Deviation Zone in Coordinate Metrology Using Harmonic Function Properties\u201d, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC\/CIE 2014, Aug 19-22, 2014, Buffalo, NY, United States.<\/em> DOI: http:\/\/dx.doi.org\/10.1115\/DETC2014-35575<\/a>
C63<\/strong>
Sikder, S., Barari, A., Kishawy, H.,  2014, \u201cEffect of Adaptive Slicing on Surface Integrity in Additive Manufacturing\u201d, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC\/CIE 2014, Aug 19-22, 2014, Buffalo, NY, United States.<\/em> DOI: http:\/\/dx.doi.org\/10.1115\/DETC2014-35559<\/a>
C62<\/strong>
Mordo, S., Popravko, V., Barari, A., 2014, \u201cEffect of Diamond-Like-Carbon Coating on 3D Surface Roughness\u201d, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC\/CIE 2014, Aug 19-22, 2014, Buffalo, NY, United States.<\/em> DOI: http:\/\/dx.doi.org\/10.1115\/DETC2014-35580<\/a>
C61<\/strong>
Martins, T., Tsuzuki, M., Takimoto, R., Barari, A., 2014, \u201cAlgorithmic Iterative Sampling in Coordinate Metrology Plan for Coordinate Metrology Using Dynamic Uncertainty Analysis\u201d, The 12th IEEE International Conference on Industrial Informatics<\/em>, July 27-30, 2014, INDIN 2014, Porto Alegre, Brazile. <\/em>DOI: http:\/\/dx.doi.org\/10.1109\/INDIN.2014.6945531<\/a>
C60<\/strong>
Barari, A., 2014, \u201cOptimized Vapor Treatment Operation for Fused Deposition Modeling Process to Improve Surface Quality\u201d, Society of Manufacturing Engineering, The Authority on 3D Printing, Scanning and Additive Manufacturing, JUNE 9-12, 2014, Cobo Center, Detroit, MI, Rapid 2014.<\/em>
C59<\/strong>
Wood, I., Barari, A., Esmailzadeh, E., 2014, \u201cUsing The Simple Structural Beam Model to Optimize and Analyze Automotive Structures for Torsion Stiffness and Fundamental Natural Frequency\u201d, Canadian Society for Mechanical Engineering International Congress 2014, June 1-4, 2014, Toronto, Ontario, Canada.<\/em>
C58<\/strong>
Jamiolahmadi, S., Barari, A., 2014, \u201cSetting a Proper Convergence Criteria in Finite Difference-Based Development of Detailed Deviation Zone\u201d, Canadian Society for Mechanical Engineering International Congress 2014, June 1-4, 2014, Toronto, Ontario, Canada.<\/em>
C57<\/strong>
Mordo, S., Popravko, V., Barari, A., 2014, \u201cModeling the Effect of Diamond-Like Carbon Coating on Surface Friction\u201d, Canadian Society for Mechanical Engineering International Congress 2014, June 1-4, 2014, Toronto, Ontario, Canada.<\/em>
C56<\/strong>
Sikder, S., Barari, A., Kishawy, H., 2014, \u201cAdaptive Direct Slicing to Improve Surface Quality in Additive Manufacturing\u201d, Canadian Society for Mechanical Engineering International Congress 2014, June 1-4, 2014, Toronto, Ontario, Canada.<\/em>
C55<\/strong>
Barari, A., Jamiolahmadi, S., 2014, \u201cEstimation of Surface Roughness of Additive Manufacturing Parts Using Finite Difference Method\u201d, American Society for Precision Engineering (ASPE) Spring Topical Meeting April 13-16, 2014, University of California, Berkeley, CA, USA.<\/em>
C54<\/strong>
Sikder, S., Barari, A., Kishawy, H., 2014, \u201cEnhancing Surface Finish and Dimensional Accuracy in Additive Manufacturing Using Global Adaptive Direct Slicing\u201d, American Society for Precision Engineering (ASPE) Spring Topical Meeting April 13-16, 2014, University of California, Berkeley, CA, USA.<\/em>
C53<\/strong>
Barari, A., 2014, \u201cEffect of Direct Slicing on Geometric Tolerances in Additive Manufacturing Process\u201d, American Society for Precision Engineering (ASPE) Spring Topical Meeting April 13-16, 2014, University of California, Berkeley, CA, USA.<\/em>
C52<\/strong>
Askari, H., Barari, A., Esmailzadeh, E., 2013, \u201cAnalysis of Nonlinear Oscillation of Circular Curved Carbon Nanotube\u201d, The 13th IEEE International Conference on Nanotechnology<\/em>, August 5-8, 2013, Beijing, China. <\/em>DOI: http:\/\/dx.doi.org\/10.1109\/NANO.2014.6968150<\/a>
C51<\/strong>
Barari, A., Kaji, F., 2013, \u201cComparing the Uncertainty of Coordinate Metrology as a Function of Sampling Strategy in Optical and Tactile Inspection Systems\u201d, The<\/em> 29th<\/sup> Coordinate Metrology Systems Conference (CMSC), CMSC 2013, July 22-26, 2013, San Diego, California, United States.<\/em>
C50<\/strong>
Askari, H., Barari, A., Esmailzadeh, E., 2013, \u201cAnalytical Solution for Nonlinear Vibration of Sinusoidal Curved Carbon Nanotube\u201d, 4th Canadian Conference on Nonlinear Solid Mechanics (CanCNSM2013)<\/em>, July 23-26, 2013, Montreal, QC, Canada.<\/em>
C49<\/strong>
Heroux, A., Tutunea-Fatan, O. R., Salisbury, S. P., Barari, A., 2013, \u201cMinimization of Bone Removal Through Optimal Humeral Implant Alignment in Total Elbow Arthroplasty\u201d, International CAD Conference, CAD’13, June 17-20, 2013 University of Bergamo, Bergamo, Italy.<\/em>
C48<\/strong>
Tebby, S., Barari, A. Esmailzadeh, E., 2013, \u201cSubstituting Simple Structural Beam-Frame Substructures with Equivalent Beam-Plate Combinations\u201d, International CAD Conference, CAD’13, June 17-20, 2013 University of Bergamo, Bergamo, Italy.<\/em>
C47<\/strong>
Barari, A., Mordo, S., 2013, \u201cIterative Sampling for Flatness Inspection Using High Density Data Points\u201d, International CAD Conference, CAD’13, June 17-20, 2013 University of Bergamo, Bergamo, Italy.<\/em>
C46<\/strong>
Sikder, S., Barari, A., Kishawy, H., 2013, \u201cAdaptive Slicing Approach to Control Surface Error Factor in Rapid Prototyping Process\u201d, International CAD Conference, CAD’13, June 17-20, 2013 University of Bergamo, Bergamo, Italy.<\/em>
C45<\/strong>
Ghani, O. A., Barari, A., Agelin-Chaab, M., 2013, \u201cWake Structure and Aerodynamic Characteristics of Rectangular Cylinders\u201d, CANCAM 2013, 24th Canadian Congress of Applied Mechanics, June 2-6, 2013, Saskatoon, Canada.<\/em>
C44<\/strong>
Mordo, S., Popravko, V., Barari, A., 2013, \u201cStudy of the Effect of Substrate on 3D Surface Roughness in Diamond-Like-Carbon Coating Process\u201d, IFAC Conference on Manufacturing, Modeling, Management, and Control, MIM2013, June 19-21, 2013, Saint Petersburg, Russia. <\/em>DOI: http:\/\/dx.doi.org\/10.3182\/20130619-3-RU-3018.00585<\/a>
C43<\/strong>
Sikder, S., Barari, A., Kishawy, H., 2013, \u201cControl of NURBS-Based Surface Error Factor Using a Manufacturing Cost Optimization in Rapid Prototyping Process\u201d, IFAC Conference on Manufacturing, Modeling, Management, and Control, MIM2013, June 19-21, 2013, Saint Petersburg, Russia.<\/em> DOI: http:\/\/dx.doi.org\/10.3182\/20130619-3-RU-3018.00577<\/a>
C42<\/strong>
Diba, F., Barari, A., Esmailzadeh, E., 2012, \u201cActive Aerodynamic System to Improve the Safety and Handling of Race Cars in Lane Change and Wet Road Maneuvers\u201d, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC\/CIE 2012, Aug 12-15, 2012, Chicago, IL, United States.<\/em> http:\/\/dx.doi.org\/10.1115\/DETC2012-71272<\/a>
C41<\/strong>
Tebby, S., Barari, A. Esmailzadeh, E., 2012, \u201cAnalysis and Optimization of Automotive Structure\u2019s Bending Stiffness Using Beam Elements\u201d, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC\/CIE 2012, Aug 12-15, 2012, Chicago, IL, United States.<\/em> DOI: <\/em>http:\/\/dx.doi.org\/10.1115\/DETC2012-71288<\/a>
C40<\/strong>
Barari, A., 2012, \u201cTolerance Allocation for Structures subject to Various Loading Events\u201d, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC\/CIE 2012, Aug 12-15, 2012, Chicago, IL, United States.<\/em> DOI: 10.1115\/DETC2012-71369
C39<\/strong>
Barari, A., 2012, \u201cProfile Tolerance Allocation for Rapid Prototyping of Sculptured Surfaces in a Direct Slicing Process\u201d, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC\/CIE 2012, Aug 12-15, 2012, Chicago, IL, United States. <\/em>DOI: http:\/\/dx.doi.org\/10.1378\/chest.114.1.340<\/a>   <\/em>
C38<\/strong>
Barari, A., \u201cTolerance allocation Based on the Minimum Deformation Zone of Finite Element Structural Frame Analysis\u201d, International CAD Conference, CAD’12, Jun 11-14, 2012, Niagara Falls, Ontario, Canada.<\/em>
C37<\/strong>
Tebby, S., Barari, A. Esmailzadeh, E., 2012, \u201cOptimization of Vehicle Structure Considering Torsion Stiffness Using Simple Structural Beam Frame-Approach\u201d, International CAD Conference, CAD’12, Jun 11-14, 2012, Niagara Falls, Ontario, Canada.<\/em>
C36<\/strong>
Sikder, S., Barari, A., Kishawy, H., 2012, \u201cEffect of a New Adaptive Slicing Approach to Control Cusp Height of Rapid Prototyping Parts\u201d, International CAD Conference, CAD’12, Jun 11-14, 2012, Niagara Falls, Ontario, Canada.<\/em>
C35<\/strong>
Tebby, S., Barari, A. Esmailzadeh, E., 2012, \u201cOptimization of Vehicle Structure Considering Torsion Stiffness Using Simple Structural Beam Frame-Approach\u201d, Canadian Society for Mechanical Engineering International Congress 2012, June 4-6, 2012, Winnipeg, Manitoba, Canada.<\/em>
C34<\/strong>
Diba, F., Barari, A., Esmailzadeh, E., 2012, \u201cDynamic Performance Enhancement of Small Size Racing Car\u201d, Canadian Society for Mechanical Engineering International Congress 2012, June 4-6, 2012, Winnipeg, Manitoba, Canada.<\/em>
C33<\/strong>
Abbasi, A., Barari, A.,  Ahmadian, M.T., 2012, \u201cDeformation Prediction of Biological Cells in Cell Injection Experiment Using Support Vector Machine Modeling\u201d, Canadian Society for Mechanical Engineering International Congress 2012, June 4-6, 2012, Winnipeg, Manitoba, Canada.<\/em>
C32<\/strong>
Ahmadian, M.T., Barari, A., Saljooghi, R, 2012, \u201cBuckling Criteria of FGM Beams Using Reproducing Kernel Particle Method\u201d, Canadian Society for Mechanical Engineering International Congress 2012, June 4-6, 2012, Winnipeg, Manitoba, Canada.<\/em>
C31<\/strong>
Abbasi, A., Ahmadian, M.T., Barari, A., 2012, \u201cBiological Cells Modeling Under Needle Injection Experiment\u201d, Canadian Society for Mechanical Engineering International Congress 2012, June 4-6, 2012, Winnipeg, Manitoba, Canada.<\/em>
C30<\/strong>
Sikder, S., Barari, A., Kishawy, H., 2012, \u201cControllability of Surface Roughness by Adaptive Slicing in Rapid Prototyping Manufacture\u201d, Canadian Society for Mechanical Engineering International Congress 2012, June 4-6, 2012, Winnipeg, Manitoba, Canada.<\/em>
C29<\/strong>
Ghanati, G., Ahmadian, M.T., Firoozbakhsh, K., Rouzbeh, B., Barari, A., 2012, \u201cPrediction of Bone Remodeling Around a Novel Dental Implant with an Elastomeric Internal Layer, Simulating Periodontal Ligaments’ Function\u201d, Canadian Society for Mechanical Engineering International Congress 2012, June 4-6, 2012, Winnipeg, Manitoba, Canada.<\/em>
C28<\/strong>
Hadipour, M., Ahmadian, M. T., Lashkari S.G., Barari, A., 2011, \u201cNatural Frequency Improvement of a Suspended FGM bridge\u201d, ASME International Mechanical Engineering Congress & Exposition, IMECE 2011,November 11-17, 2011,Denver, Colorado, United States.<\/em> DOI: http:\/\/dx.doi.org\/10.1115\/IMECE2011-63411<\/a>
C27<\/strong>
Mazaheri, H., Hosseinzadeh, A., Ahmadian, M. T., Barari, A., 2011, \u201cNonlinear Vibration Analysis of a Micro Beam Exposed to an External Flow\u201d, ASME International Mechanical Engineering Congress & Exposition, IMECE 2011,November 11-17, 2011,Denver, Colorado, United States.<\/em> DOI: http:\/\/dx.doi.org\/10.1115\/IMECE2011-64722<\/a>
C26<\/strong>
Mazaheri, H., Hosseinzadeh, A., Ahmadian, M. T., Barari, A., 2011, \u201cAnalytical Approach to Vibration Analysis of a Pendulum Wrapping on a Cylinder\u201d, ASME International Mechanical Engineering Congress & Exposition, IMECE 2011,November 11-17, 2011,Denver, Colorado, United States. <\/em>DOI: http:\/\/dx.doi.org\/10.1115\/IMECE2011-62856<\/em><\/a>
C25<\/strong>
Sarvi, M.N.,  Ahmadian, M. T., Barari, A., 2011, \u201cDeformation and Stress Analysis of the Fullerene by Super Element\u201d, ASME International Mechanical Engineering Congress & Exposition, IMECE 2011,November 11-17, 2011,Denver, Colorado, United States.<\/em> DOI: http:\/\/dx.doi.org\/10.1115\/IMECE2011-63741<\/a>
C24<\/strong>
Barari, A., 2011, \u201cCoordinate Metrology Based on Maximum Conformance to Tolerances for  Closed-Loop Fabrication\u201d, 26th Annual Meeting of the American Society for Precision Engineering,  November 13 -18, 2011, Denver, CO, United States.<\/em>
C23<\/strong>
Barari, A., 2011, \u201cReducing the Coordinate Metrology Uncertainty by Employing an  Integrated Computational System\u201d, the second International Congress on Mechanical Metrology, IICIMMEC, September 27-30, 2011,  Natal, Brazil.<\/em>
C22<\/strong>
Barari, A., 2011, \u201cEstimation of detailed deviation zone of inspected surfaces\u201d, Advanced Mathematical and Computational Tools in Metrology and Testing, AMCTM 2011, June 20-22, 2011,  G\u00f6teborg, Sweden.<\/em>
C21<\/strong>
Tebby, S., Esmailzadeh, E., Barari, A., 2011, \u201cComparison of Numerical Methods for Determining Torsion Stiffness of Automotive Chassis\u201d, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC\/CIE 2011, Aug 28-31, 2011, Washington, DC, United States.<\/em> DOI: http:\/\/dx.doi.org\/10.1115\/DETC2011-48026<\/a>
C20<\/strong>
Barari, A., Diba, F., Esmailzadeh, E., 2011, \u201cDown Force Control of the low Velocity Racing Car Using Active Aerodynamic Inverse Wings\u201d, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC\/CIE 2011, Aug 28-31, 2011, Washington, DC, United States.<\/em> DOI: http:\/\/dx.doi.org\/10.1115\/DETC2011-48308<\/a>
C19<\/strong>
Barari, A., 2011, \u201cEvaluation of Deviation Zone Based on Maximum Conformance to  Tolerances\u201d, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC\/CIE 2011, Aug 28-31, 2011, Washington, DC, United States.<\/em> DOI: http:\/\/dx.doi.org\/10.1115\/DETC2011-48444<\/a>
C18<\/strong>
Barari, A., 2011, \u201cProfile Coordinate Metrology Based on Maximum Conformance to Tolerances\u201d, The<\/em> 27th<\/sup> Coordinate Metrology Systems Conference (CMSC), CMSC 2011, July 25-29, 2011, Phoenix, Arizona, United States.<\/em>
C17<\/strong>
Tebby, S., Esmailzadeh, E., Barari, A.,  2011, \u201cFEA-Based Methods to Determine Torsion Stiffness in Automotive Structure\u201d,  2011 PACE Annual Forum, Collaborative Strategies to Address Global Challenges, July 25-30, 2011,  Vancouver, British Columbia, Canada.<\/em>
C16<\/strong>
Barari, A., 2011, \u201cEstimation of Detailed Deviation Zone in Coordinate Metrology\u201d, 13th International Conference on Metrology and Properties of Engineering Surfaces, Met & Props 2011, April 12-15, 2011, National Physical Laboratory , Teddington, Middlesex, England.<\/em>
C15<\/strong>
Barari, A., Rolstin, J., 2010, \u201cDesign of Adjustable Aerodynamic System for a Low Velocity High Down-Force Application\u201d, 2010 PACE Annual Forum, Facing Global Challenges- Solutions for the Future, July 19-23, Seoul – Korea.<\/em>
C14<\/strong>
Barari, A., 2010, \u201cFEM-Based Optimum Design of Vehicle\u2019s Door Hinge to Maintain the Desired Auto-Body Gap Tolerances\u201d,  2010 PACE Annual Forum, Facing Global Challenges- Solutions for the Future, July 19-23, Seoul – Korea.<\/em>
C13<\/strong>
Platanitis, G., Pop-Iliev, R., Barari, A., 2010, \u201cComprehensive Use of a DSM-Based Methodology in an Academic Setting\u201d, International Design Conference – DESIGN 2010, May 17 – 20, Dubrovnik – Croatia.<\/em>
C12<\/strong>
Platanitis, G., Barari, A., Pop-Iliev, R., 2010, \u201cIntroducing Design Rigidity to Model Unexpected Disturbances In a DSM-Based Design Process\u201d,  ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference- IDETC\/CIE 2010, DETC2010-28218, pp. 453-460, August 15-18, Montreal, Quebec – Canada.<\/em> DOI: http:\/\/dx.doi.org\/10.1115\/DETC2010-28218<\/a>
C11<\/strong>
Barari, A., 2010, \u201cCAM-Based Inspection of Machined Surfaces\u201d, 5th International Conference on Advances in Production Engineering- APE2010<\/em>,  17 \u2013 19 June 2010,  Warsaw, Poland.
C10<\/strong>
Platanitis, G., Pop-Iliev, R., Barari, A., 2009, \u201cA DSM-based Method for Investigating the Impact of Random Disturbances on the Outcome of a Design Project\u201d, Proceeding of  11th International Design Structure Matrix Conference (DSM 09), 12 \u2013 13 OCTOBER 2009, Greenville, South Carolina, USA.<\/em>
C09<\/strong>
Barari, A., 2009, \u201cMisinterpretation of Geometric Dimensioning and Tolerancing in Coordinate Metrology\u201d, Electronic proceeding of  11th International CIRP Conference on Computer Aided Tolerancing – Geometric Variations within Product Life Cycle Management (CAT2009), <\/em>March  2009, Annecy, France.
C08<\/strong>
Barari, A., Pop-Iliev R., 2009, \u201cIntegration of Design Tolerance Analysis and Statistical Production Control in the Product Lifecycle Management\u201d, Electronic proceeding of  11th International CIRP Conference on Computer Aided Tolerancing – Geometric Variations within Product Life Cycle Management (CAT2009), <\/em>March  2009, Annecy, France.
C07<\/strong>
Barari, A., 2008, \u201cSources of Uncertainty in Coordinate Metrology of Automotive Body\u201d, CD Proc. of 2nd CIRP International Conference on Assembly Technologies and Systems (CATS 2008), Toronto<\/em>, Canada.
C06<\/strong>
Barari, A., Pop-Iliev R., 2007, \u201cClosed-Loop Engineering in Adaptable Design and Manufacturing Systems\u201d, CD Proc. of 2nd International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 2007), <\/em>Toronto, Canada.
C05<\/strong>
Barari A., and ElMaraghy H. A., 2005, \u201cManufacturing driven design of sculptured surfaces\u201d, 15th<\/sup><\/em> CIRP<\/em> International Conference in Design<\/em>, Egypt, pp. 523-534.
C04<\/strong>
Barari A., ElMaraghy. H. A., and Knopf G. K., 2005, \u201cEvaluation of geometric deviations in sculptured surfaces using probability density estimation\u201d, CD Proc. of 9th<\/sup>  CIRP International Seminar on Computer Aided Tolerancing (CAT2005)<\/em>, Tempe, Arizona, USA.
C03<\/strong>
Barari A., ElMaraghy H. A., Knopf G. K., and Orban P., 2004, \u201cIntegrated inspection and machining approach to machining error compensation; Advantages and limitations\u201d, The 14th<\/sup>  International Conference on Flexible Automation & Intelligent Manufacturing<\/em>, Toronto, Canada, pp. 563-572.
C02<\/strong>
ElMaraghy H. A., Barari, A.,  Knopf G. K., 2004, \u201cIntegrated inspection and machining for maximum conformance to design tolerances\u201d 54th CIRP General Assembly, <\/em>Krakow, Poland.
C01<\/strong>
Barari A., Ahmadian M. T., 1999, \u201cOptimum slicing of model for rapid prototyping\u201d, The 4th<\/sup> SMEIR Conference on Manufacture Engineering<\/em>, Tehran, Iran, pp. 218-228.<\/td><\/tr><\/tbody><\/table><\/figure>\n<\/div><\/details><\/div>\n\n\n\n
Contribution to Books<\/summary>
\n

<\/p>\n\n\n\n

B04<\/strong>
Goto T. G., Najafabadi H. R.,  Duran G. C.,  Ueda E. K.,  Sato A. K.,  Martins T. C., Takimoto R. Y., Gohari H., Barari A., Tsuzuki M. S.G., 2021,, 2021, \u201cVersatility of Simulated Annealing with Crystallization Heuristic: Its Application to a Great Assortment of Problems\u201d Optimization Problems in Engineering, Open access peer-reviewed chapter – ONLINE FIRST<\/em>, IntechOpen,   DOI: http:\/\/dx.doi.org\/10.5772\/intechopen.98562<\/a>
B03<\/strong>
Barari A., 2012, \u201cChapter 2- Estimation of Detailed Deviation Zone of Inspected Surfaces\u201d, Series on Advances in Mathematics for Applied Sciences, Volume. 48 – Advanced Mathematical and Computational Tools in Metrology and Testing IX, <\/em>March 2012, World Scientific, Editor: Franco Pavese, Markus B\u00e4r, Jean-R\u00e9my Filtz, Alistair B Forbes, ISBN: 978-981-4397-94-0, Pages 18-26, DOI: http:\/\/dx.doi.org\/10.1142\/9789814397957_0003<\/a>
B02<\/strong>
Barari A., ElMaraghy H. A., Knopf G. K., 2007, \u201cEvaluation of geometric deviations in sculptured surfaces using probability density estimation\u201d, Models for Computer Aided Tolerancing in Design and Manufacturing<\/em>, Springer Netherlands, Editor: Joseph K. Davidson, ISBN: 978-1-4020-5437-2, Pages 135-146, DOI: http:\/\/dx.doi.org\/10.1007\/1-4020-5438-6_15<\/a>
B01<\/strong>
Barari A., ElMaraghy H. A, 2006, \u201cManufacturing driven design of sculptured surfaces\u201d, Springer Series in Advanced Manufacturing<\/em> – Advances in Design<\/em>, Springer-Verlag, Germany, Editors: Hoda A. ElMaraghy and Waguih H. ElMaraghy, ISBN 1-84628-004-4, Pages 523-534. DOI: http:\/\/dx.doi.org\/10.1007\/1-84628-210-1_43<\/a>
EB03<\/strong>
Barari, A., Tsuzuki, M., S. G., Cohen, Y., and Macchi, M., \u201cIntelligent manufacturing Systems Towards Industry 4.0 Era\u201c, Journal of Intelligent Manufacturing, Special Issue, (2021).
EB02<\/strong>
Barari A., IFAC-PapersOnLine , Special Issue for 13th IFAC Workshop on Intelligent Manufacturing Systems IMS 2019\u201d, ScienceDirect, Volume 52, Issue 10, Pages 1-406 (2019), https:\/\/www.sciencedirect.com\/journal\/ifac-papersonline\/vol\/52\/issue\/10<\/a>
EB01<\/strong>
Barari A., \u201cConcurrent Engineering and Design\u201d, McGraw Hill, 2008, ISBN: 9780070262187, 480 pages.<\/td><\/tr><\/tbody><\/table><\/figure>\n<\/div><\/details><\/div>\n<\/div>\n\n\n\n
<\/path><\/svg><\/div>
<\/div><\/div>\n\n\n\n

<\/p>\n","protected":false},"excerpt":{"rendered":"

Publications<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"saved_in_kubio":false,"_coblocks_attr":"","_coblocks_dimensions":"","_coblocks_responsive_height":"","_coblocks_accordion_ie_support":"","hide_page_title":"","footnotes":""},"class_list":["post-51","page","type-page","status-publish","hentry"],"kubio_ai_page_context":{"short_desc":"","purpose":"general"},"_links":{"self":[{"href":"http:\/\/ahmadbarari.com\/portfolio\/wp-json\/wp\/v2\/pages\/51","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/ahmadbarari.com\/portfolio\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"http:\/\/ahmadbarari.com\/portfolio\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"http:\/\/ahmadbarari.com\/portfolio\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/ahmadbarari.com\/portfolio\/wp-json\/wp\/v2\/comments?post=51"}],"version-history":[{"count":34,"href":"http:\/\/ahmadbarari.com\/portfolio\/wp-json\/wp\/v2\/pages\/51\/revisions"}],"predecessor-version":[{"id":362,"href":"http:\/\/ahmadbarari.com\/portfolio\/wp-json\/wp\/v2\/pages\/51\/revisions\/362"}],"wp:attachment":[{"href":"http:\/\/ahmadbarari.com\/portfolio\/wp-json\/wp\/v2\/media?parent=51"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}