Articles in referred publications

Journal Papers
Gohari, H., Barari, A., 2021, “Finding Optimal Correspondence Sets for Large Digital Metrology Point Clouds Using Anisotropic Diffusion Analogy”, International Journal of Computer Integrated Manufacturing, Accepted.
Akbari, S., Mahboubkhah, M., Karimi, D., Barari, A., 2021, “Experimental and analytical evaluation of tool path error using computer integrated nonlinear kinematical modeling for a 4DOF parallel milling machine”, International Journal of. Computer Integrated Manufacturing, In-press
Barari, A., Tsuzuki, M., S. G., Cohen, Y., and Macchi, M., 2021, “Intelligent manufacturing Systems Towards Industry 4.0 Era“, Journal of Intelligent Manufacturing, Open Access,  https://doi.org/10.1007/s10845-021-01769-0
Gohari, H., Barari, A., Kishawy, H., 2021, “Adaptive Variable Layer Thickness and Perimetral Offset Planning for Layer-based Additive Manufacturing Processes”, International Journal of Computer Integrated Manufacturing, Accepted.
Umaras, E., Barari, A., Tsuzuki, M., S. G., 2021, “Heavy Vehicles Brake Drums – An Accurate Evaluation on Thermal Loads in Sever Service Conditions “, International Journal of Automotive Technology, Volume 22, Issue 1, 371–382.
Umaras, E., Barari, A., Tsuzuki, M.,  2020, “Tolerance analysis based on Monte Carlo simulation: a case of an automotive water pump design optimization”, Journal of Intelligent Manufacturing, In-Press, DOI: https://doi.org/10.1007/s10845-020-01695-7
Doria, F. F.,  Lima, F. B. C. L., Sato, A. K.,  Takimoto, R. Y., Barari, A., Tsuzuki F. S. G., Tsuzuki, M. S. G., 2020, “Determinação das Linhas do Campo de Futebol para sua Reconstrução 3D”, Anais da Sociedade Brasileira de Automática, Volume  2, Issue 1
Tanabi, N., Duran, G. C., Scaff, W., Tsuzuki, M. S. G., Barari, A., 2020, “Otimização Aerodinâmica de Aerofólio em Escoamento Compressível pelo Método Adjunto”, Anais da Sociedade Brasileira de Automática, Volume 2, Issue 1
McCarthy, R., Gino, B., d’Entremont, P., Barari, A., Renouf, T. S., 2020, “The Importance of Personal Protective Equipment Design and Donning and Doffing Technique in Mitigating Infectious Disease Spread: A Technical Report”, Cureus, Volume 12, Issue 12, https://doi.org/10.7759/cureus.12084
Mahboubkhah, M., Barari, A., 2019, “Design and development of a novel 4-DOF parallel kinematic coordinate measuring machine (CMM)”, Int. J. Computer Integrated Manufacturing, Volume  32, Issue 8, pp 750-760, DOI: https://doi.org/10.1080/0951192X.2019.1610576
Berry, C., Barari A., 2018, “Closed-Loop Coordinate Metrology for Hybrid Manufacturing System”, IFAC-PapersOnLine, Volume 51, Issue 11, 2018, Pages, Pages 752-757, DOI: https://doi.org/10.1016/j.ifacol.2018.08.409
Lalehpour, A., Barari, A., 2018, “A More Accurate Analytical Formulation of Surface Roughness in Layer-Based Additive Manufacturing to Enhance the Product’s Precision”, International Journal of Advanced Manufacturing Technology, Volume 96,  pp 3793–3804, DOI: https://doi.org/10.1007/s00170-017-1448-x  
Gohari, H., Barari, A., Kishawy, H., 2018, “An Efficient Methodology for Slicing NURBS Surfaces Using Multi-step Methods”, International Journal of Advanced Manufacturing Technology, Volume 95,   pp 3111–3125, DOI: https://doi.org/10.1007/s00170-017-1219-8
Lalehpour, A., Janeteas, C., Barari, A., 2017, “Surface roughness of FDM parts after post-processing with acetone vapor bath smoothing process”, International Journal of Advanced Manufacturing Technology, Volume 95, Issue 1–4,  pp 1505–1520. DOI: DOI https://doi.org/10.1007/s00170-017-1165-5
Lalehpour, A., Berry, C., Barari, A., 2017, “Adaptive data reduction with neighbourhood search approach in coordinate measurement of planar surfaces”, Journal of Manufacturing Systems, Volume 45, Pages 28-47, DOI:  http://dx.doi.org/10.1016/j.jmsy.2017.07.001
Lalehpour, A., Barari, A., 2017, “Developing Skin Model in Coordinate Metrology Using a Finite Element Method”, Measurements, Volume 109, Pages 149-159, DOI:  https://doi.org/10.1016/j.measurement.2017.05.056  
Jamiolahmadi, S., Barari, A., 2018, “Study of Detailed Deviation Zone Considering Coordinate Metrology Uncertainty and Manufacturing Accuracy”, Measurements, Volume 126,  Pages 433-457, DOI: http://dx.doi.org/10.1016/j.measurement.2016.12.032
Barari, A., Kishawy. H., Kaji. F., Elbestawi, M. A., 2016, “On the Surface Quality of Additive Manufactured Parts”, International Journal of Advanced Manufacturing Technology,  Volume 89, No. 5-8, Pages 1969-1974, DOI: http://dx.doi.org/10.1007/s00170-016-9215-y
Gohari, H., Barari, A., Kishawy, H., 2016, “Using Multistep Methods in Slicing 2 ½ Dimensional Parametric Surfaces for Additive Manufacturing Applications”, IFAC-PapersOnLine, Volume 49, Issue 31, Pages 67-72, DOI: https://doi.org/10.1016/j.ifacol.2016.12.163
Lalehpour, A., Barari, A., 2016, “Post processing for Fused Deposition Modeling Parts with Acetone Vapour Bath”, IFAC-PapersOnLine, Volume 49, Issue 31, Pages 42-48,DOI: https://doi.org/10.1016/j.ifacol.2016.12.159
Gohari, H., Barari, A., 2016, “Using Perona‐Malik Anisotropic Heat Diffusion for Data Reduction in Coordinate Metrology”, Journal of the CMSC, Volume 11, No. 2, Autumn 2016, Pages 18-26.
Gohari, H., Barari, A., 2016, “A Quick Deviation Zone Fitting in Coordinate Metrology of NURBS Surfaces Using Principle Component Analysis”, Measurement, Volume 92, October 2016,Pages 352-364, DOI: http://dx.doi.org/10.1016/j.measurement.2016.05.050
Ghani, A.O., Agelin-chaab, M., Barari, A., 2015, “Application Framework for Aero-based Design Optimization of Passenger Cars using NURBS”, Journal of Applied Mechanical Engineering, Volume4, issue 6, 8 pages, DOI: http://dx.doi.org/10.4172/2168-9873.1000188
Barari, A., Jamiolahmadi, S.,  2015, “Convergence of A Finite Difference Approach for Detailed Deviation Zone Estimation in coordinate metrology”, Acta IMEKO,  Volume 4, No 4, Pages 20‐25, DOI: http://dx.doi.org/10.21014/acta_imeko.v4i4.271
Askari, H., Esmailzadeh, E., Barari, A., 2015, “A Unified Approach for Nonlinear Vibration Analysis of Curved Structures using Non-Uniform Rational B-Spline Representation”, Journal of Sound and Vibration, Volume 353, 29 September 2015, Pages 292–307, DOI: http://dx.doi.org/10.1016/j.jsv.2015.05.022 
Jamiolahmadi, S., Barari, A., 2014, “Surface Topography of Additive Manufacturing Parts Using a Finite Difference Approach”, ASME Transactions – Journal of Manufacturing Science and Engineering, Volume 136, No 6, pages 061009-1:8, DOI: http://dx.doi.org/10.1115/1.4028585 
Sikder, S., Barari, A., Kishawy, H., 2015,“Global Adaptive Slicing of NURBS Based Sculptured Surface for Minimum Texture Error in Rapid Prototyping”, Rapid Prototyping Journal, Volume 21, Issue 6, pp: 649-661,  DOI: http://dx.doi.org/10.1108/RPJ-09-2013-0090
Diba, F., Barari, A., Esmailzadeh, E., 2014,“Handling and Safety Enhancement of Racing Cars Using Active Aerodynamic Systems”, Journal of Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility, Volume 52, Issue 9, Pages 1171-1190, DOI: http://dx.doi.org/10.1080/00423114.2014.930158 
Barari, A., Kaji, F., 2014, “The Uncertainty of Coordinate Metrology as a Function of Sampling Strategy”, Journal of the CMSC, Volume 9, No 1, Spring 2014, Pages 22-27.
Tebby, S., Barari, A. Esmailzadeh, E., 2014, “Development of Optimized Preliminary Vehicle Structural Model Using Simple Structural Beams-Frames (SSB) and Sub-Structural Analysis”, Journal of Computer-Aided Design and Applications, Volume 11, No. 5, Pages 544-551, DOI: http://dx.doi.org/10.1080/16864360.2014.902685
Heroux, A., Tutunea-Fatan, O. R., Salisbury, S. P., Barari, A., 2014, “Minimization of Bone Removal Through Optimal Humeral Implant Alignment in Total Elbow Arthroplasty”, Journal of Computer-Aided Design and Applications, Volume 11, No. 4, Pages 478-492, DOI: http://dx.doi.org/10.1080/16864360.2014.881192
Barari, A., Mordo, S., 2013, “Effect of Sampling Strategy on Uncertainty and Precision of Flatness Inspection Studied by Dynamic Minimum Deviation Zone Evaluation”, International Journal of Metrology and Quality Engineering, Volume 4, Issue 01, Pages 3-8, DOI: http://dx.doi.org/10.1051/ijmqe/2012039
Barari, A., 2013, “Tolerance allocation Based on the Minimum Deformation Zone of Finite Element Structural Frame Analysis”, Journal of Computer-Aided Design and Applications, Volume 10, No. 4, Pages 629-641,  DOI: http://dx.doi.org/10.3722/cadaps.2013.629-641
Tebby, S., Barari, A. Esmailzadeh, E., 2013, “Optimization of Vehicle Structure Considering Torsion Stiffness Using Simple Structural Beam Frame-Approach”, Journal of Computer-Aided Design and Applications, Volume 10, No. 3, Pages 413-426, DOI:http://dx.doi.org/10.3722/cadaps.2013.413-426
Barari, A., 2013, “Inspection of the Machined Surfaces Using Manufacturing Data” , Journal of Manufacturing Systems, Volume 32, Issue 1, Pages 107-113, DOI:                                      http://dx.doi.org/10.1016/j.jmsy.2012.07.011
Barari, A., 2012, “A Best-Fit Method to Maximize Conformance to Tolerance in Surface Coordinate Metrology”, Journal of the CMSC, Volume 7, No. 1, Spring 2012, Pages 20-27.
Platanitis, G., Pop-Iliev, R., Barari, A., 2012, “Development of a DSM-Based Methodology in an Academic Setting”, ASME Transactions- Journal of Mechanical Design, Vol. 134, Issue 2, Pages 021007-1 :11,11 pages, DOI: http://dx.doi.org/10.1115/1.4005591
Barari, A., 2011, “Automotive‐ Body Inspection Uncertainty Due to Computational Complexity”, International Journal of Vehicle Design, Volume 57, No. 2/3, Pages 230-241, DOI: http://dx.doi.org/10.1504/IJVD.2011.044725
Tebby, S., Esmailzadeh, E., Barari, A.,  2011, “Methods to Determine Torsion Stiffness in an Automotive Chassis”, Journal of Computer-Aided Design and Applications, PACE Special Issue,  Volume 1, Pages 67-75, DOI:http://dx.doi.org/10.3722/cadaps.2011.PACE.67-75
Barari, A., Pop-Iliev R., 2009, “Reducing Rigidity by Implementing Closed-Loop Engineering in Adaptable Design and Manufacturing Systems”, Journal of Manufacturing Systems, Volume 28, Issues 2-3, Pages 47-54, July 2009, DOI:http://dx.doi.org/10.1016/j.jmsy.2009.04.003
Barari, A., ElMaraghy H. A., ElMaraghy W. A.,  2009,“Design For Machining of Sculptured Surfaces – A Computational platform”, ASME Transactions- Journal of Computing and Information Science in Engineering , Volume 9, Issue 3, June 2009 , 021006-1:13 pages. DOI: http://dx.doi.org/10.1115/1.3130143
Barari, A., ElMaraghy H. A., Orban P., 2009, “NURBS Representation of Actual Machined Surfaces”, International Journal of Computer Integrated Manufacturing, Volume 22, Issue 5, May 2009, Pages 395 – 410, DOI: http://dx.doi.org/10.1080/09511920802392730
Barari, A., ElMaraghy H. A., Knopf G. K., 2007, “Search – Guided sampling to reduce uncertainty of minimum zone estimation”, ASME Transactions- Journal of Computing and Information Science in Engineering, Volume 7, Issue 4, Pages 360-371, DOI: http://dx.doi.org/10.1115/1.2798114
ElMaraghy H. A., Barari, A., Knopf G. K., 2004, “Integrated inspection and machining for maximum conformance to design tolerances”, CIRP Annals-Manufacturing Technology, Volume 53, No 1, Pages 411-416, DOI: http://dx.doi.org/10.1016/S0007-8506(07)60728-8
Conference Papers
Kenji Ueda, E., Barari, A., Tsuzuki, M. S. G., 2021, “Determination of Open Boundaries in Point Clouds with Symmetry”, Proceedings of the 19th International Conference on Geometry and Graphics (ICGG 2020), São Paulo, Brazil, 9-13 August 2020, Springer, 332-342.
Duran, G. C., Sato, A. K., Tanabi, N., Nasiri, H., Takimoto, R. Y., Barari, A., Thiago, M. C., Tsuzuki, M., S. G., 2021, “Framework for Electrical Impedance Tomography Forward Problem with Non-uniform Electrodes Distribution”, Proceedings of the 19th International Conference on Geometry and Graphics (ICGG 2020), São Paulo, Brazil, 9-13 August 2020, Springer, 320-331.
Tanabi, N., L., Barari, A., Vakilipour, S., Tsuzuki F. S. G., Tsuzuki, M. S. G., 2021, “Inverse Designing Airfoil Aerodynamics in Compressible Flow by Target Pressure Distribution”, Proceedings of the 19th International Conference on Geometry and Graphics (ICGG 2020), São Paulo, Brazil, 9-13 August 2020, Springer, 308-319.
Najafabadi, H. R., Tiago, G. C., Thiago, M. C., Barari, A., Tsuzuki, M. S. G., 2021, “Multi-objective Topology Optimization Using Simulated Annealing Method”, Proceedings of the 19th International Conference on Geometry and Graphics (ICGG 2020), São Paulo, Brazil, 9-13 August 2020, Springer, 343-353.
Doria, F. F., Lima, F. B. C. L., Sato, A. K., Takimoto, R. Y., Barari, A., Tsuzuki F. S. G., Tsuzuki, M. S. G., 2021, “Soccer Field Lines Determination and 3D Reconstruction”, Proceedings of the 19th International Conference on Geometry and Graphics (ICGG 2020), São Paulo, Brazil, 9-13 August 2020, Springer, 568-579.
Filho, F. A., Munhoz, J. V., Takimoto, R. Y., Barari, A., Tsuzuki, M., S., 2021, “Human Thorax Parametric Reconstruction Using Computer Vision”, Proceedings of the 19th International Conference on Geometry and Graphics (ICGG 2020), São Paulo, Brazil, 9-13 August 2020, Springer, 580-591.
Gohari, H., Bender D., Barari, A., 2020, “3D Printable Pneumatic Valves for Rapidly Manufacturable Mechanical Ventilator Amid Covid-19 Outbreak”, 2020 IEEE 10th International Conference Nanomaterials: Applications & Properties (NAP), Sumy, Ukraine, 9-13 November 2020.
Gohari, H., Barari, A., 2020, “Producing High Precision Additive Manufacturing Parts by Direct Printing of NURBS Surfaces”, 2020 IEEE 10th International Conference Nanomaterials: Applications & Properties (NAP), Sumy, Ukraine, 9-13 November 2020.
Kenji Ueda, E., Barari, A., Tsuzuki, M., Sato, A., 2020, “Detection of Defected Zone Using 3D Scanning Data to Repair Worn Turbine Blades”, 21st IFAC World Congress, Berlin, Germany, Canada, 11-17 July 2020.
Gohari, H., Barari, A., Kishawy, H., Tsuzuki, M., 2020, “Effect of Direct Slicing on Precision Additive Manufacturing”, 21st IFAC World Congress, Berlin, Germany, 11-17 July 2020.
Mahboubkhah, M., Akhbari, S., Barari A., 2019, “Self-Configuration Machining capability of a 4-DOF parallel kinematic machine tool with nonsingular workspace for Intelligent Manufacturing Systems”, 13th IFAC Workshop on Intelligent Manufacturing Systems, Oshawa, Ontario, Canada, 12-14 August 2019.
Mahboubkhah, M., Aliakbari, M., Barari A., 2019, “An Intelligent Self-Calibrating 4-DOF Parallel Robot for Precise Geometric Data Collection in Digital Manufacturing”, 13th IFAC Workshop on Intelligent Manufacturing Systems, Oshawa, Ontario, Canada, 12-14 August 2019.
Bender D., Barari A., 2019, “Integrated Digital Design and Manufacturing for 3D Printing Technologies”, 13th IFAC Workshop on Intelligent Manufacturing Systems, Oshawa, Ontario, Canada, 12-14 August 2019.
Gohari Bahabadi, H., Barari A., Kishawy, H., Tsuzuki, M., 2019, “Intelligent Process Planning for Additive Manufacturing”, 13th IFAC Workshop on Intelligent Manufacturing Systems, Oshawa, Ontario, Canada, 12-14 August 2019.
Jankovics, D., Barari A., 2019, “Customization of Automotive Structural Components using Additive Manufacturing and Topology Optimization”, 13th IFAC Workshop on Intelligent Manufacturing Systems, Oshawa, Ontario, Canada, 12-14 August 2019.
Gohari Bahabadi, H., Berry, C., Barari A., 2019, “A Digital Twin for Integrated Inspection System in Digital Manufacturing”, 13th IFAC Workshop on Intelligent Manufacturing Systems,  Oshawa, Ontario, Canada, 12-14 August 2019.
Umaras, E.,  Barari, A., Tsuzuki, M., 2019, “Intelligent Design Tolerance Allocation for Optimum Adaptability to Manufacturing Using a Monte Carlo Approach”, 13th IFAC Workshop on  Intelligent Manufacturing Systems,  Oshawa, Ontario, Canada, 12-14 August 2019.
Berry, C., Barari A., 2019, “Cyber-Physical System Utilizing Work-Piece Memory in Digital Manufacturing”, 13th IFAC Workshop on  Intelligent Manufacturing Systems,  Oshawa, Ontario, Canada, 12-14 August 2019.
Berry, C., Barari A., 2019, “Noise Filtration of 3D Scanned Data Points in Metrology of Highly Reflective Surfaces”, The 35nd Coordinate Metrology Systems Conference (CMSC), CMSC 2019, July 22 – 26, 2019, Orlando, Florida.
Gohari Bahabadi, H., Barari A., 2019, “GEOMETRIC COMPLEXITY ESTIMATION OF CONTINUOUS SURFACES FOR FITTING PROCESSES”, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE 2019, Aug 18-21, 2019, Anaheim, CA, USA.
Bender D., Barari A., 2019, “DIRECT SOLID ELEMENT SLICING IN TOPOLOGY OPTIMIZATION FOR ADDITIVE MANUFACTURING”, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE 2019, Aug 18-21, 2019, Anaheim, CA, USA.
Jankovics, D., Agelin-Chaab, M., Barari A., 2019, “Development of a Formula SAE Front Wing with an Emphasis on Additional Aerodynamic Devices”, 27th Annual Conference of the CFD Society of Canada (CFDSC) – CFD 2019, June 2-5, 2019, London, Canada.
Gohari Bahabadi, H., Barari A., 2019, “Accurate Estimation of Process Parameters in Fused Deposition Modeling”, Canadian Society of Mechanical Engineers (CSME) International Congress – CSME 2019, June 2-5, 2019, London, Canada.
Berry, C., Barari A., 2019, “Global Statistics Based Method for Denoising of Planar Point Clouds”, Canadian Society of Mechanical Engineers (CSME) International Congress – CSME 2019, June 2-5, 2019, London, Canada.
Bender, D., Barari A., 2019, “Multi-Element Slicing Approach for Intelligent Additive Manufacturing Preprocessing”, Canadian Society of Mechanical Engineers (CSME) International Congress – CSME 2019, June 2-5, 2019, London, Canada.
Ueda, E. K., Tsuzuki, M. S. G., Barari A., 2018, “Piecewise B´ezier Curve Fitting of a Point Cloud Boundary by Simulated Annealing”, 13th IEEE/IAS International Conference on Industry Applications., INDUSCON 2018, November 11-14, 2018, São Paulo, Brazil.
Bender D., Barari A., 2018, “Overhanging Feature Analysis for the Additive Manufacturing of Topology Optimized Structures”, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE 2018, Aug 26-29, 2018, Quebec City, Quebec, Canada.
Jankovics, D., Gohari, H., Tayefeh, M., Barari A., 2018, “Developing Topology Optimization with Additive Manufacturing Constraints in ANSYS®”, 16th IFAC Symposium on Information Control Problems in Manufacturing – INCOM 2018, June 11-13, 2018 Bergamo, Italy.
Berry, C., Barari A., 2018, “Closed-Loop Coordinate Metrology for Hybrid Manufacturing System”, 16th IFAC Symposium on Information Control Problems in Manufacturing – INCOM 2018, June 11-13, 2018 Bergamo, Italy.
Jankovics, D., Gohari, H., Barari A., 2018, “Constrained Topology Optimization For Additive Manufacturing Of Structural Components In Ansys®”, Canadian Society of Mechanical Engineers (CSME) International Congress – CSME 2018, May 27-30, 2018 Toronto, Canada.
Berry, C., Goodwin, L., Barari A., 2018, “Effect of the Error Propagation Rates in Developing a Skin Model of Measured Surfaces in Coordinate Metrology”, Canadian Society of Mechanical Engineers (CSME) International Congress – CSME 2018, May 27-30, 2018 Toronto, Canada.
Bender, D., Barari A., 2018, “Convergence Control for Topology Optimization”, Canadian Society of Mechanical Engineers (CSME) International Congress – CSME 2018, May 27-30, 2018 Toronto, Canada.
Hoursan, H., Ahmadian, M., Kazemiasfeh, R., Barari, A., 2018, “On the Validity Extent of Linear viscoelastic Models of Human Brain”, Canadian Society of Mechanical Engineers (CSME) International Congress – CSME 2018, May 27-30, 2018 Toronto, Canada.
Hoursan, H., Moradi, M., Hadjiazim, M., Ahmadian, M., Barari, A., 2018, “A Procedure for Performance Experimental Analysis of a Globe Control Valve”, Canadian Society of Mechanical Engineers (CSME) International Congress – CSME 2018, May 27-30, 2018 Toronto, Canada.
Berry C., Barari A., 2018, “Minimizing the Undercut Condition in On‐Machine Measurement Using Weighted Total Least Squares Fitting”, 7th International Conference of Metrology in Africa – CAFMET 2018, April 9-12, 2018 – Marrakesh, Morocco.
Lalehpour A., Barari A., 2017, “A Topology Optimization Paradigm for Additive Manufacturing”, Society of Manufacturing Engineering, The Authority on 3D Printing, Scanning and Additive Manufacturing, May 8-11, 2017 – Pittsburgh, Pennsylvania,  Rapid + TCT 2017.
Gohari, H., Barari, A., 2017, “A Curvature-Based Direct Slicing Algorithm for Precision Additive Manufacturing”, Society of Manufacturing Engineering, The Authority on 3D Printing, Scanning and Additive Manufacturing, May 8-11, 2017 – Pittsburgh, Pennsylvania,  Rapid + TCT 2017.
Gohari, H., Barari, A., Kishawy, H., “Using Multistep Methods in Slicing 2 ½ Dimensional Parametric Surfaces for Additive Manufacturing Applications”, The 12nd Workshop on Intelligent Manufacturing Systems, IMS 2016, December 5-7, 2016, National Instruments, Austin, TX, United States.
Lalehpour, A., Barari, A., “Post processing for Fused Deposition Modeling Parts with Acetone Vapour Bath”, The 12nd Workshop on Intelligent Manufacturing Systems, IMS 2016, December 5-7, 2016, National Instruments, Austin, TX, United States.
Gohari, H., Barari, A., “A New Data Reduction Approach in Coordinate Metrology Using Perona‐Malik Anisotropic Heat Diffusion”, The 32nd Coordinate Metrology Systems Conference (CMSC), CMSC 2016, July 25-29, 2016, Nashville, TN, United States.
Berry, C., Lalehpour, A., Barari, A., “Dynamic Point Selection Strategy In Coordinate Metrology of Flat Surfaces”, XII-th INTERNATIONAL SCIENTIFIC CONFERENCE, Coordinate Measuring Technique, CMT 2016, April 18 – 20 , 2016, Szczyrk,  Poland.
Gohari, H., Barari, A., “Proper Initial Condition for Deviation Zone Evaluation of a Freeform Surface Using  Principle Component Analysis”, XII-th INTERNATIONAL SCIENTIFIC CONFERENCE, Coordinate Measuring Technique, CMT 2016, April 18 – 20 , 2016, Szczyrk,  Poland.
Lalehpour, A., Berry, C., Barari, A., “An experimental study on the effect of sampling strategy in coordinate measurement of planar surfaces”, XII-th INTERNATIONAL SCIENTIFIC CONFERENCE, Coordinate Measuring Technique, CMT 2016, April 18 – 20 , 2016, Szczyrk,  Poland.
Barari, A., Lalehpour, A., Jamiolahmadi, S., “A Finite Element Approach to Estimate the Detailed Deviation Zone in Coordinate Metrology”, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE 2015, Aug 2-5, 2015, Boston, MA, United States. DOI: http://dx.doi.org/10.1115/DETC2015-48008
Barari, A., Kaji, F., “Modelling of Cusp Geometry in Additive Manufacturing Parts Using a Piece-Wise Polynomial”, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE 2015, Aug 2-5, 2015, Boston, MA, United States.
Jamiolahmadi, S., Barari, A., “Convergence Study of Genetic Programming Approach to Estimate Surface Integrity on Additive Manufacturing Parts”, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE 2015, Aug 2-5, 2015, Boston, MA, United States. DOI: http://dx.doi.org/10.1115/DETC2015-47997
Fallah, A., Ahmadian, M.T., Barari, A., “Nonlinear Free Vibration of Piezoelectric Functionally Graded Beams in Thermal Environment”, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE 2015, Aug 2-5, 2015, Boston, MA, United States. DOI: http://dx.doi.org/10.1115/DETC2015-46163
Barari, A., Lalehpour, A., “Estimation of the Detailed Deviation Zone in Coordinate Metrology Using a Finite Element Solution”, The 31st Coordinate Metrology Systems Conference (CMSC), CMSC 2015, July 20-24, 2015, Hollywood, MI, United States.
Barari, A., Jamiolahmadi, S., “A Genetic Programming Approach to Model Detailed Surface Integrity of Additive Manufacturing Parts”, IFAC Symposium on Information Control in Manufacturing (INCOM 2015), May 10-13, 2015, Ottawa, Canada. DOI: http://dx.doi.org/10.1016/j.ifacol.2015.06.437
Marchesi, T., Lahuerta, R., Silva, E., Tsuzuki, M., Martins, T., Barari, A., Wood, I., “Topologically Optimized Diesel Engine Support Manufactured with Additive Manufacturing”, IFAC Symposium on Information Control in Manufacturing (INCOM 2015), May 10-13, 2015, Ottawa, Canada. DOI: http://dx.doi.org/10.1016/j.ifacol.2015.06.436
Barari, A., Kaji, F., “Evaluation of the Surface Roughness of Additive Manufacturing Parts Based on the Modeling of Cusp Geometry”, IFAC Symposium on Information Control in Manufacturing (INCOM 2015), May 10-13, 2015, Ottawa, Canada. DOI: http://dx.doi.org/10.1016/j.ifacol.2015.06.157
Martins, T., Tsuzuki, M., Barari, A., 2014, “Sampling Plan for Coordinate Metrology Using Uncertainty Analysis”, ASME International Mechanical Engineering Congress & Exposition, IMECE 2014,November 14-20, 2014, Montreal, Canada.
Wood, I., Barari, A., Esmailzadeh, E., 2014, “Using Simple Structural Beam Model to Optimize for Bending Stiffness and Vibration in Automotive Structures”, ASME International Mechanical Engineering Congress & Exposition, IMECE 2014,November 14-20, 2014, Montreal, Canada. DOI: http://dx.doi.org/10.1115/IMECE2014-37992
Mordo, S., Popravko, V., Barari, A., 2014, “Surface tribology Study Resulting by Diamond-like Carbon Coating”, ASME International Mechanical Engineering Congress & Exposition, IMECE 2014, November 14-20, 2014, Montreal, Canada. DOI: http://dx.doi.org/10.1115/IMECE2014-38776
Jamiolahmadi, S., Barari, A., 2014, “Surface Roughness Model for Additive Manufacturing Parts Using Finite Difference Method”, ASME International Mechanical Engineering Congress & Exposition, IMECE 2014, November 14-20, 2014, Montreal, Canada.
Jamiolahmadi, S., Barari, A., 2014, “Validation of Using Finite Difference Method to Estimate Detailed Deviation Zone in Coordinate Metrology”, Advanced Mathematical and Computational Tools in Metrology and Testing (AMCTM 2014), D.I.Mendeleyev Institute for Metrology (VNIIM), 9 and 10-12 September, 2014, St.Petersburg, Russia.
Saadatnia, Z., Barari, A., Esmailzadeh, E., 2014, “Nonlinear Forced Vibration Analysis of Free-Form Nanotube Conveying Fluid”, The 14th IEEE International Conference on Nanotechnology, August 18-22, 2014, Toronto, Canada. DOI: http://dx.doi.org/10.1109/NANO.2014.6968150
Wood, I., Barari, A., Esmailzadeh, E., 2014, “Using the Simple Structural Beam (SSB) Model to Optimize and Analyze Automotive Structures for Bending Stiffness and Natural Frequency”, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC/CIE 2014, Aug 19-22, 2014, Buffalo, NY, United States.  DOI: http://dx.doi.org/10.1115/DETC2014-35549
Jamiolahmadi, S., Barari, A., 2014, “An Approach to Estimate the Detailed Deviation Zone in Coordinate Metrology Using Harmonic Function Properties”, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC/CIE 2014, Aug 19-22, 2014, Buffalo, NY, United States. DOI: http://dx.doi.org/10.1115/DETC2014-35575
Sikder, S., Barari, A., Kishawy, H.,  2014, “Effect of Adaptive Slicing on Surface Integrity in Additive Manufacturing”, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC/CIE 2014, Aug 19-22, 2014, Buffalo, NY, United States. DOI: http://dx.doi.org/10.1115/DETC2014-35559
Mordo, S., Popravko, V., Barari, A., 2014, “Effect of Diamond-Like-Carbon Coating on 3D Surface Roughness”, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC/CIE 2014, Aug 19-22, 2014, Buffalo, NY, United States. DOI: http://dx.doi.org/10.1115/DETC2014-35580
Martins, T., Tsuzuki, M., Takimoto, R., Barari, A., 2014, “Algorithmic Iterative Sampling in Coordinate Metrology Plan for Coordinate Metrology Using Dynamic Uncertainty Analysis”, The 12th IEEE International Conference on Industrial Informatics, July 27-30, 2014, INDIN 2014, Porto Alegre, Brazile. DOI: http://dx.doi.org/10.1109/INDIN.2014.6945531
Barari, A., 2014, “Optimized Vapor Treatment Operation for Fused Deposition Modeling Process to Improve Surface Quality”, Society of Manufacturing Engineering, The Authority on 3D Printing, Scanning and Additive Manufacturing, JUNE 9-12, 2014, Cobo Center, Detroit, MI, Rapid 2014.
Wood, I., Barari, A., Esmailzadeh, E., 2014, “Using The Simple Structural Beam Model to Optimize and Analyze Automotive Structures for Torsion Stiffness and Fundamental Natural Frequency”, Canadian Society for Mechanical Engineering International Congress 2014, June 1-4, 2014, Toronto, Ontario, Canada.
Jamiolahmadi, S., Barari, A., 2014, “Setting a Proper Convergence Criteria in Finite Difference-Based Development of Detailed Deviation Zone”, Canadian Society for Mechanical Engineering International Congress 2014, June 1-4, 2014, Toronto, Ontario, Canada.
Mordo, S., Popravko, V., Barari, A., 2014, “Modeling the Effect of Diamond-Like Carbon Coating on Surface Friction”, Canadian Society for Mechanical Engineering International Congress 2014, June 1-4, 2014, Toronto, Ontario, Canada.
Sikder, S., Barari, A., Kishawy, H., 2014, “Adaptive Direct Slicing to Improve Surface Quality in Additive Manufacturing”, Canadian Society for Mechanical Engineering International Congress 2014, June 1-4, 2014, Toronto, Ontario, Canada.
Barari, A., Jamiolahmadi, S., 2014, “Estimation of Surface Roughness of Additive Manufacturing Parts Using Finite Difference Method”, American Society for Precision Engineering (ASPE) Spring Topical Meeting April 13-16, 2014, University of California, Berkeley, CA, USA.
Sikder, S., Barari, A., Kishawy, H., 2014, “Enhancing Surface Finish and Dimensional Accuracy in Additive Manufacturing Using Global Adaptive Direct Slicing”, American Society for Precision Engineering (ASPE) Spring Topical Meeting April 13-16, 2014, University of California, Berkeley, CA, USA.
Barari, A., 2014, “Effect of Direct Slicing on Geometric Tolerances in Additive Manufacturing Process”, American Society for Precision Engineering (ASPE) Spring Topical Meeting April 13-16, 2014, University of California, Berkeley, CA, USA.
Askari, H., Barari, A., Esmailzadeh, E., 2013, “Analysis of Nonlinear Oscillation of Circular Curved Carbon Nanotube”, The 13th IEEE International Conference on Nanotechnology, August 5-8, 2013, Beijing, China. DOI: http://dx.doi.org/10.1109/NANO.2014.6968150
Barari, A., Kaji, F., 2013, “Comparing the Uncertainty of Coordinate Metrology as a Function of Sampling Strategy in Optical and Tactile Inspection Systems”, The 29th Coordinate Metrology Systems Conference (CMSC), CMSC 2013, July 22-26, 2013, San Diego, California, United States.
Askari, H., Barari, A., Esmailzadeh, E., 2013, “Analytical Solution for Nonlinear Vibration of Sinusoidal Curved Carbon Nanotube”, 4th Canadian Conference on Nonlinear Solid Mechanics (CanCNSM2013), July 23-26, 2013, Montreal, QC, Canada.
Heroux, A., Tutunea-Fatan, O. R., Salisbury, S. P., Barari, A., 2013, “Minimization of Bone Removal Through Optimal Humeral Implant Alignment in Total Elbow Arthroplasty”, International CAD Conference, CAD’13, June 17-20, 2013 University of Bergamo, Bergamo, Italy.
Tebby, S., Barari, A. Esmailzadeh, E., 2013, “Substituting Simple Structural Beam-Frame Substructures with Equivalent Beam-Plate Combinations”, International CAD Conference, CAD’13, June 17-20, 2013 University of Bergamo, Bergamo, Italy.
Barari, A., Mordo, S., 2013, “Iterative Sampling for Flatness Inspection Using High Density Data Points”, International CAD Conference, CAD’13, June 17-20, 2013 University of Bergamo, Bergamo, Italy.
Sikder, S., Barari, A., Kishawy, H., 2013, “Adaptive Slicing Approach to Control Surface Error Factor in Rapid Prototyping Process”, International CAD Conference, CAD’13, June 17-20, 2013 University of Bergamo, Bergamo, Italy.
Ghani, O. A., Barari, A., Agelin-Chaab, M., 2013, “Wake Structure and Aerodynamic Characteristics of Rectangular Cylinders”, CANCAM 2013, 24th Canadian Congress of Applied Mechanics, June 2-6, 2013, Saskatoon, Canada.
Mordo, S., Popravko, V., Barari, A., 2013, “Study of the Effect of Substrate on 3D Surface Roughness in Diamond-Like-Carbon Coating Process”, IFAC Conference on Manufacturing, Modeling, Management, and Control, MIM2013, June 19-21, 2013, Saint Petersburg, Russia. DOI: http://dx.doi.org/10.3182/20130619-3-RU-3018.00585
Sikder, S., Barari, A., Kishawy, H., 2013, “Control of NURBS-Based Surface Error Factor Using a Manufacturing Cost Optimization in Rapid Prototyping Process”, IFAC Conference on Manufacturing, Modeling, Management, and Control, MIM2013, June 19-21, 2013, Saint Petersburg, Russia. DOI: http://dx.doi.org/10.3182/20130619-3-RU-3018.00577
Diba, F., Barari, A., Esmailzadeh, E., 2012, “Active Aerodynamic System to Improve the Safety and Handling of Race Cars in Lane Change and Wet Road Maneuvers”, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC/CIE 2012, Aug 12-15, 2012, Chicago, IL, United States. http://dx.doi.org/10.1115/DETC2012-71272
Tebby, S., Barari, A. Esmailzadeh, E., 2012, “Analysis and Optimization of Automotive Structure’s Bending Stiffness Using Beam Elements”, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC/CIE 2012, Aug 12-15, 2012, Chicago, IL, United States. DOI: http://dx.doi.org/10.1115/DETC2012-71288
Barari, A., 2012, “Tolerance Allocation for Structures subject to Various Loading Events”, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC/CIE 2012, Aug 12-15, 2012, Chicago, IL, United States. DOI: 10.1115/DETC2012-71369
Barari, A., 2012, “Profile Tolerance Allocation for Rapid Prototyping of Sculptured Surfaces in a Direct Slicing Process”, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC/CIE 2012, Aug 12-15, 2012, Chicago, IL, United States. DOI: http://dx.doi.org/10.1378/chest.114.1.340   
Barari, A., “Tolerance allocation Based on the Minimum Deformation Zone of Finite Element Structural Frame Analysis”, International CAD Conference, CAD’12, Jun 11-14, 2012, Niagara Falls, Ontario, Canada.
Tebby, S., Barari, A. Esmailzadeh, E., 2012, “Optimization of Vehicle Structure Considering Torsion Stiffness Using Simple Structural Beam Frame-Approach”, International CAD Conference, CAD’12, Jun 11-14, 2012, Niagara Falls, Ontario, Canada.
Sikder, S., Barari, A., Kishawy, H., 2012, “Effect of a New Adaptive Slicing Approach to Control Cusp Height of Rapid Prototyping Parts”, International CAD Conference, CAD’12, Jun 11-14, 2012, Niagara Falls, Ontario, Canada.
Tebby, S., Barari, A. Esmailzadeh, E., 2012, “Optimization of Vehicle Structure Considering Torsion Stiffness Using Simple Structural Beam Frame-Approach”, Canadian Society for Mechanical Engineering International Congress 2012, June 4-6, 2012, Winnipeg, Manitoba, Canada.
Diba, F., Barari, A., Esmailzadeh, E., 2012, “Dynamic Performance Enhancement of Small Size Racing Car”, Canadian Society for Mechanical Engineering International Congress 2012, June 4-6, 2012, Winnipeg, Manitoba, Canada.
Abbasi, A., Barari, A.,  Ahmadian, M.T., 2012, “Deformation Prediction of Biological Cells in Cell Injection Experiment Using Support Vector Machine Modeling”, Canadian Society for Mechanical Engineering International Congress 2012, June 4-6, 2012, Winnipeg, Manitoba, Canada.
Ahmadian, M.T., Barari, A., Saljooghi, R, 2012, “Buckling Criteria of FGM Beams Using Reproducing Kernel Particle Method”, Canadian Society for Mechanical Engineering International Congress 2012, June 4-6, 2012, Winnipeg, Manitoba, Canada.
Abbasi, A., Ahmadian, M.T., Barari, A., 2012, “Biological Cells Modeling Under Needle Injection Experiment”, Canadian Society for Mechanical Engineering International Congress 2012, June 4-6, 2012, Winnipeg, Manitoba, Canada.
Sikder, S., Barari, A., Kishawy, H., 2012, “Controllability of Surface Roughness by Adaptive Slicing in Rapid Prototyping Manufacture”, Canadian Society for Mechanical Engineering International Congress 2012, June 4-6, 2012, Winnipeg, Manitoba, Canada.
Ghanati, G., Ahmadian, M.T., Firoozbakhsh, K., Rouzbeh, B., Barari, A., 2012, “Prediction of Bone Remodeling Around a Novel Dental Implant with an Elastomeric Internal Layer, Simulating Periodontal Ligaments’ Function”, Canadian Society for Mechanical Engineering International Congress 2012, June 4-6, 2012, Winnipeg, Manitoba, Canada.
Hadipour, M., Ahmadian, M. T., Lashkari S.G., Barari, A., 2011, “Natural Frequency Improvement of a Suspended FGM bridge”, ASME International Mechanical Engineering Congress & Exposition, IMECE 2011,November 11-17, 2011,Denver, Colorado, United States. DOI: http://dx.doi.org/10.1115/IMECE2011-63411
Mazaheri, H., Hosseinzadeh, A., Ahmadian, M. T., Barari, A., 2011, “Nonlinear Vibration Analysis of a Micro Beam Exposed to an External Flow”, ASME International Mechanical Engineering Congress & Exposition, IMECE 2011,November 11-17, 2011,Denver, Colorado, United States. DOI: http://dx.doi.org/10.1115/IMECE2011-64722
Mazaheri, H., Hosseinzadeh, A., Ahmadian, M. T., Barari, A., 2011, “Analytical Approach to Vibration Analysis of a Pendulum Wrapping on a Cylinder”, ASME International Mechanical Engineering Congress & Exposition, IMECE 2011,November 11-17, 2011,Denver, Colorado, United States. DOI: http://dx.doi.org/10.1115/IMECE2011-62856
Sarvi, M.N.,  Ahmadian, M. T., Barari, A., 2011, “Deformation and Stress Analysis of the Fullerene by Super Element”, ASME International Mechanical Engineering Congress & Exposition, IMECE 2011,November 11-17, 2011,Denver, Colorado, United States. DOI: http://dx.doi.org/10.1115/IMECE2011-63741
Barari, A., 2011, “Coordinate Metrology Based on Maximum Conformance to Tolerances for  Closed-Loop Fabrication”, 26th Annual Meeting of the American Society for Precision Engineering,  November 13 -18, 2011, Denver, CO, United States.
Barari, A., 2011, “Reducing the Coordinate Metrology Uncertainty by Employing an  Integrated Computational System”, the second International Congress on Mechanical Metrology, IICIMMEC, September 27-30, 2011,  Natal, Brazil.
Barari, A., 2011, “Estimation of detailed deviation zone of inspected surfaces”, Advanced Mathematical and Computational Tools in Metrology and Testing, AMCTM 2011, June 20-22, 2011,  Göteborg, Sweden.
Tebby, S., Esmailzadeh, E., Barari, A., 2011, “Comparison of Numerical Methods for Determining Torsion Stiffness of Automotive Chassis”, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC/CIE 2011, Aug 28-31, 2011, Washington, DC, United States. DOI: http://dx.doi.org/10.1115/DETC2011-48026
Barari, A., Diba, F., Esmailzadeh, E., 2011, “Down Force Control of the low Velocity Racing Car Using Active Aerodynamic Inverse Wings”, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC/CIE 2011, Aug 28-31, 2011, Washington, DC, United States. DOI: http://dx.doi.org/10.1115/DETC2011-48308
Barari, A., 2011, “Evaluation of Deviation Zone Based on Maximum Conformance to  Tolerances”, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC/CIE 2011, Aug 28-31, 2011, Washington, DC, United States. DOI: http://dx.doi.org/10.1115/DETC2011-48444
Barari, A., 2011, “Profile Coordinate Metrology Based on Maximum Conformance to Tolerances”, The 27th Coordinate Metrology Systems Conference (CMSC), CMSC 2011, July 25-29, 2011, Phoenix, Arizona, United States.
Tebby, S., Esmailzadeh, E., Barari, A.,  2011, “FEA-Based Methods to Determine Torsion Stiffness in Automotive Structure”,  2011 PACE Annual Forum, Collaborative Strategies to Address Global Challenges, July 25-30, 2011,  Vancouver, British Columbia, Canada.
Barari, A., 2011, “Estimation of Detailed Deviation Zone in Coordinate Metrology”, 13th International Conference on Metrology and Properties of Engineering Surfaces, Met & Props 2011, April 12-15, 2011, National Physical Laboratory , Teddington, Middlesex, England.
Barari, A., Rolstin, J., 2010, “Design of Adjustable Aerodynamic System for a Low Velocity High Down-Force Application”, 2010 PACE Annual Forum, Facing Global Challenges- Solutions for the Future, July 19-23, Seoul – Korea.
Barari, A., 2010, “FEM-Based Optimum Design of Vehicle’s Door Hinge to Maintain the Desired Auto-Body Gap Tolerances”,  2010 PACE Annual Forum, Facing Global Challenges- Solutions for the Future, July 19-23, Seoul – Korea.
Platanitis, G., Pop-Iliev, R., Barari, A., 2010, “Comprehensive Use of a DSM-Based Methodology in an Academic Setting”, International Design Conference – DESIGN 2010, May 17 – 20, Dubrovnik – Croatia.
Platanitis, G., Barari, A., Pop-Iliev, R., 2010, “Introducing Design Rigidity to Model Unexpected Disturbances In a DSM-Based Design Process”,  ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference- IDETC/CIE 2010, DETC2010-28218, pp. 453-460, August 15-18, Montreal, Quebec – Canada. DOI: http://dx.doi.org/10.1115/DETC2010-28218
Barari, A., 2010, “CAM-Based Inspection of Machined Surfaces”, 5th International Conference on Advances in Production Engineering- APE2010,  17 – 19 June 2010,  Warsaw, Poland.
Platanitis, G., Pop-Iliev, R., Barari, A., 2009, “A DSM-based Method for Investigating the Impact of Random Disturbances on the Outcome of a Design Project”, Proceeding of  11th International Design Structure Matrix Conference (DSM 09), 12 – 13 OCTOBER 2009, Greenville, South Carolina, USA.
Barari, A., 2009, “Misinterpretation of Geometric Dimensioning and Tolerancing in Coordinate Metrology”, Electronic proceeding of  11th International CIRP Conference on Computer Aided Tolerancing – Geometric Variations within Product Life Cycle Management (CAT2009), March  2009, Annecy, France.
Barari, A., Pop-Iliev R., 2009, “Integration of Design Tolerance Analysis and Statistical Production Control in the Product Lifecycle Management”, Electronic proceeding of  11th International CIRP Conference on Computer Aided Tolerancing – Geometric Variations within Product Life Cycle Management (CAT2009), March  2009, Annecy, France.
Barari, A., 2008, “Sources of Uncertainty in Coordinate Metrology of Automotive Body”, CD Proc. of 2nd CIRP International Conference on Assembly Technologies and Systems (CATS 2008), Toronto, Canada.
Barari, A., Pop-Iliev R., 2007, “Closed-Loop Engineering in Adaptable Design and Manufacturing Systems”, CD Proc. of 2nd International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 2007), Toronto, Canada.
Barari A., and ElMaraghy H. A., 2005, “Manufacturing driven design of sculptured surfaces”, 15th CIRP International Conference in Design, Egypt, pp. 523-534.
Barari A., ElMaraghy. H. A., and Knopf G. K., 2005, “Evaluation of geometric deviations in sculptured surfaces using probability density estimation”, CD Proc. of 9th  CIRP International Seminar on Computer Aided Tolerancing (CAT2005), Tempe, Arizona, USA.
Barari A., ElMaraghy H. A., Knopf G. K., and Orban P., 2004, “Integrated inspection and machining approach to machining error compensation; Advantages and limitations”, The 14th  International Conference on Flexible Automation & Intelligent Manufacturing, Toronto, Canada, pp. 563-572.
ElMaraghy H. A., Barari, A.,  Knopf G. K., 2004, “Integrated inspection and machining for maximum conformance to design tolerances” 54th CIRP General Assembly, Krakow, Poland.
Barari A., Ahmadian M. T., 1999, “Optimum slicing of model for rapid prototyping”, The 4th SMEIR Conference on Manufacture Engineering, Tehran, Iran, pp. 218-228.
Contributions to books
  • Barari, A., Tsuzuki, M., S. G., Cohen, Y., and Macchi, M., “Intelligent manufacturing Systems Towards Industry 4.0 Era“, Journal of Intelligent Manufacturing, Special Issue, (2021).
  • Barari A., IFAC-PapersOnLine , Special Issue for 13th IFAC Workshop on Intelligent Manufacturing Systems IMS 2019”, ScienceDirect, Volume 52, Issue 10, Pages 1-406 (2019), https://www.sciencedirect.com/journal/ifac-papersonline/vol/52/issue/10
  • Barari A., 2012, “Chapter 2- Estimation of Detailed Deviation Zone of Inspected Surfaces”, Series on Advances in Mathematics for Applied Sciences, Volume. 48 – Advanced Mathematical and Computational Tools in Metrology and Testing IX, March 2012, World Scientific, Editor: Franco Pavese, Markus Bär, Jean-Rémy Filtz, Alistair B Forbes, ISBN: 978-981-4397-94-0, Pages 18-26, DOI: http://dx.doi.org/10.1142/9789814397957_0003
  • Barari A., “Concurrent Engineering and Design”, McGraw Hill, 2008, ISBN: 9780070262187, 480 pages.
  • Barari A., and ElMaraghy H. A, 2006, “Manufacturing driven design of sculptured surfaces”, Advances in Design, Springer-Verlag, Edited by: W.A. ElMaraghy, Germany ISBN 1-84628-004-4, pp. 523-534.
  • Barari A., ElMaraghy H. A., Knopf G. K., “Evaluation of geometric deviations in sculptured surfaces using probability density estimation”, Models for Computer Aided Tolerancing in Design and Manufacturing, Edited by: J. Davidson, Springer Netherlands, ISBN 978-1-4020-5437-2, pp.135-146.
Contributions to practical applications of knowledge – Software Development
  • Barari A., 1999, Developing an integrated software solution for industrial Rapid Prototyping system (Protogen), for Razi Metallurgy Co. Ltd, Tehran, Iran Application: The software is developed for adaptive slicing of the solid Model, automated generation of supports and automatic optimum path generation.
  • Barari A., 1999, Developing Machining Tool-Path Simulation Software for Three-Axis DECKEL CNC Milling Machine (3D-Sim), for Husseini Machine-Tools Co. Ltd., Tehran, Iran Application: 3D graphical machining tool-path simulation for machining of the sculptured surface.
  • Barari A., 1998, Developing controlling software for 4-axes CNC Milling Machine (3D-Con), for Husseini Machine-Tools Co. Ltd., Tehran, Iran Application: To Control machining operation for 3D Linear, Circular, Ellipsoidal and Helical Interpolations with capability of 3D tool radius compensation in contour milling.