Publications
Journal Papers
| J45 Najafabadi H. T., Goto T. G., Falheiro M. S., Martins T. C., Barari A., Tsuzuki M. S.G., 2021, “Smart Topology Optimization Using Adaptive Neighborhood Simulated Annealing”, Applied Sciences, Volume 11, no. 11, 5257. J44 Gohari, H., Barari, A., 2021, “Finding Optimal Correspondence Sets for Large Digital Metrology Point Clouds Using Anisotropic Diffusion Analogy”, International Journal of Computer Integrated Manufacturing, https://doi.org/10.1080/0951192X.2021.1948103 . J43 Akbari, S., Mahboubkhah, M., Karimi, D., Barari, A., 2021, “Experimental and analytical evaluation of tool path error using computer integrated nonlinear kinematical modeling for a 4DOF parallel milling machine”, International Journal of. Computer Integrated Manufacturing, https://doi.org/10.1080/0951192X.2021.1925968 J42 Barari, A., Tsuzuki, M., S. G., Cohen, Y., and Macchi, M., 2021, “Intelligent manufacturing Systems Towards Industry 4.0 Era“, Journal of Intelligent Manufacturing, Open Access, https://doi.org/10.1007/s10845-021-01769-0 J41 Gohari, H., Barari, A., Kishawy, H., 2021, “Adaptive Variable Layer Thickness and Perimetral Offset Planning for Layer-based Additive Manufacturing Processes”, International Journal of Computer Integrated Manufacturing, https://doi.org/10.1080/0951192X.2021.1946854. J40 Umaras, E., Barari, A., Tsuzuki, M., S. G., 2021, “Heavy Vehicles Brake Drums – An Accurate Evaluation on Thermal Loads in Sever Service Conditions “, International Journal of Automotive Technology, Volume 22, Issue 1, 371–382. J39 Umaras, E., Barari, A., Tsuzuki, M., 2020, “Tolerance analysis based on Monte Carlo simulation: a case of an automotive water pump design optimization”, Journal of Intelligent Manufacturing, DOI: https://doi.org/10.1007/s10845-020-01695-7 J38 Doria, F. F., Lima, F. B. C. L., Sato, A. K., Takimoto, R. Y., Barari, A., Tsuzuki F. S. G., Tsuzuki, M. S. G., 2020, “Determinação das Linhas do Campo de Futebol para sua Reconstrução 3D”, Anais da Sociedade Brasileira de Automática, Volume 2, Issue 1 J37 Tanabi, N., Duran, G. C., Scaff, W., Tsuzuki, M. S. G., Barari, A., 2020, “Otimização Aerodinâmica de Aerofólio em Escoamento Compressível pelo Método Adjunto”, Anais da Sociedade Brasileira de Automática, Volume 2, Issue 1 J36 McCarthy, R., Gino, B., d’Entremont, P., Barari, A., Renouf, T. S., 2020, “The Importance of Personal Protective Equipment Design and Donning and Doffing Technique in Mitigating Infectious Disease Spread: A Technical Report”, Cureus, Volume 12, Issue 12, https://doi.org/10.7759/cureus.12084 J35 Mahboubkhah, M., Barari, A., 2019, “Design and development of a novel 4-DOF parallel kinematic coordinate measuring machine (CMM)”, Int. J. Computer Integrated Manufacturing, Volume 32, Issue 8, pp 750-760, DOI: https://doi.org/10.1080/0951192X.2019.1610576 J34 Berry, C., Barari A., 2018, “Closed-Loop Coordinate Metrology for Hybrid Manufacturing System”, IFAC-PapersOnLine, Volume 51, Issue 11, 2018, Pages, Pages 752-757, DOI: https://doi.org/10.1016/j.ifacol.2018.08.409 J33 Lalehpour, A., Barari, A., 2018, “A More Accurate Analytical Formulation of Surface Roughness in Layer-Based Additive Manufacturing to Enhance the Product’s Precision”, International Journal of Advanced Manufacturing Technology, Volume 96, pp 3793–3804, DOI: https://doi.org/10.1007/s00170-017-1448-x J32 Gohari, H., Barari, A., Kishawy, H., 2018, “An Efficient Methodology for Slicing NURBS Surfaces Using Multi-step Methods”, International Journal of Advanced Manufacturing Technology, Volume 95, pp 3111–3125, DOI: https://doi.org/10.1007/s00170-017-1219-8 J31 Lalehpour, A., Janeteas, C., Barari, A., 2017, “Surface roughness of FDM parts after post-processing with acetone vapor bath smoothing process”, International Journal of Advanced Manufacturing Technology, Volume 95, Issue 1–4, pp 1505–1520. DOI: DOI https://doi.org/10.1007/s00170-017-1165-5 J30 Lalehpour, A., Berry, C., Barari, A., 2017, “Adaptive data reduction with neighbourhood search approach in coordinate measurement of planar surfaces”, Journal of Manufacturing Systems, Volume 45, Pages 28-47, DOI: http://dx.doi.org/10.1016/j.jmsy.2017.07.001 J29 Lalehpour, A., Barari, A., 2017, “Developing Skin Model in Coordinate Metrology Using a Finite Element Method”, Measurements, Volume 109, Pages 149-159, DOI: https://doi.org/10.1016/j.measurement.2017.05.056 J28 Jamiolahmadi, S., Barari, A., 2018, “Study of Detailed Deviation Zone Considering Coordinate Metrology Uncertainty and Manufacturing Accuracy”, Measurements, Volume 126, Pages 433-457, DOI: http://dx.doi.org/10.1016/j.measurement.2016.12.032 J27 Barari, A., Kishawy. H., Kaji. F., Elbestawi, M. A., 2016, “On the Surface Quality of Additive Manufactured Parts”, International Journal of Advanced Manufacturing Technology, Volume 89, No. 5-8, Pages 1969-1974, DOI: http://dx.doi.org/10.1007/s00170-016-9215-y J26 Gohari, H., Barari, A., Kishawy, H., 2016, “Using Multistep Methods in Slicing 2 ½ Dimensional Parametric Surfaces for Additive Manufacturing Applications”, IFAC-PapersOnLine, Volume 49, Issue 31, Pages 67-72, DOI: https://doi.org/10.1016/j.ifacol.2016.12.163 J25 Lalehpour, A., Barari, A., 2016, “Post processing for Fused Deposition Modeling Parts with Acetone Vapour Bath”, IFAC-PapersOnLine, Volume 49, Issue 31, Pages 42-48,DOI: https://doi.org/10.1016/j.ifacol.2016.12.159 J24 Gohari, H., Barari, A., 2016, “Using Perona‐Malik Anisotropic Heat Diffusion for Data Reduction in Coordinate Metrology”, Journal of the CMSC, Volume 11, No. 2, Autumn 2016, Pages 18-26. J23 Gohari, H., Barari, A., 2016, “A Quick Deviation Zone Fitting in Coordinate Metrology of NURBS Surfaces Using Principle Component Analysis”, Measurement, Volume 92, October 2016,Pages 352-364, DOI: http://dx.doi.org/10.1016/j.measurement.2016.05.050 J22 Ghani, A.O., Agelin-chaab, M., Barari, A., 2015, “Application Framework for Aero-based Design Optimization of Passenger Cars using NURBS”, Journal of Applied Mechanical Engineering, Volume4, issue 6, 8 pages, DOI: http://dx.doi.org/10.4172/2168-9873.1000188 J21 Barari, A., Jamiolahmadi, S., 2015, “Convergence of A Finite Difference Approach for Detailed Deviation Zone Estimation in coordinate metrology”, Acta IMEKO, Volume 4, No 4, Pages 20‐25, DOI: http://dx.doi.org/10.21014/acta_imeko.v4i4.271 J20 Askari, H., Esmailzadeh, E., Barari, A., 2015, “A Unified Approach for Nonlinear Vibration Analysis of Curved Structures using Non-Uniform Rational B-Spline Representation”, Journal of Sound and Vibration, Volume 353, 29 September 2015, Pages 292–307, DOI: http://dx.doi.org/10.1016/j.jsv.2015.05.022 J19 Jamiolahmadi, S., Barari, A., 2014, “Surface Topography of Additive Manufacturing Parts Using a Finite Difference Approach”, ASME Transactions – Journal of Manufacturing Science and Engineering, Volume 136, No 6, pages 061009-1:8, DOI: http://dx.doi.org/10.1115/1.4028585 J18 Sikder, S., Barari, A., Kishawy, H., 2015,“Global Adaptive Slicing of NURBS Based Sculptured Surface for Minimum Texture Error in Rapid Prototyping”, Rapid Prototyping Journal, Volume 21, Issue 6, pp: 649-661, DOI: http://dx.doi.org/10.1108/RPJ-09-2013-0090 J17 Diba, F., Barari, A., Esmailzadeh, E., 2014,“Handling and Safety Enhancement of Racing Cars Using Active Aerodynamic Systems”, Journal of Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility, Volume 52, Issue 9, Pages 1171-1190, DOI: http://dx.doi.org/10.1080/00423114.2014.930158 J16 Barari, A., Kaji, F., 2014, “The Uncertainty of Coordinate Metrology as a Function of Sampling Strategy”, Journal of the CMSC, Volume 9, No 1, Spring 2014, Pages 22-27. J15 Tebby, S., Barari, A. Esmailzadeh, E., 2014, “Development of Optimized Preliminary Vehicle Structural Model Using Simple Structural Beams-Frames (SSB) and Sub-Structural Analysis”, Journal of Computer-Aided Design and Applications, Volume 11, No. 5, Pages 544-551, DOI: http://dx.doi.org/10.1080/16864360.2014.902685 J14 Heroux, A., Tutunea-Fatan, O. R., Salisbury, S. P., Barari, A., 2014, “Minimization of Bone Removal Through Optimal Humeral Implant Alignment in Total Elbow Arthroplasty”, Journal of Computer-Aided Design and Applications, Volume 11, No. 4, Pages 478-492, DOI: http://dx.doi.org/10.1080/16864360.2014.881192 J13 Barari, A., Mordo, S., 2013, “Effect of Sampling Strategy on Uncertainty and Precision of Flatness Inspection Studied by Dynamic Minimum Deviation Zone Evaluation”, International Journal of Metrology and Quality Engineering, Volume 4, Issue 01, Pages 3-8, DOI: http://dx.doi.org/10.1051/ijmqe/2012039 J12 Barari, A., 2013, “Tolerance allocation Based on the Minimum Deformation Zone of Finite Element Structural Frame Analysis”, Journal of Computer-Aided Design and Applications, Volume 10, No. 4, Pages 629-641, DOI: http://dx.doi.org/10.3722/cadaps.2013.629-641 J11 Tebby, S., Barari, A. Esmailzadeh, E., 2013, “Optimization of Vehicle Structure Considering Torsion Stiffness Using Simple Structural Beam Frame-Approach”, Journal of Computer-Aided Design and Applications, Volume 10, No. 3, Pages 413-426, DOI:http://dx.doi.org/10.3722/cadaps.2013.413-426 J10 Barari, A., 2013, “Inspection of the Machined Surfaces Using Manufacturing Data” , Journal of Manufacturing Systems, Volume 32, Issue 1, Pages 107-113, DOI: http://dx.doi.org/10.1016/j.jmsy.2012.07.011 J09 Barari, A., 2012, “A Best-Fit Method to Maximize Conformance to Tolerance in Surface Coordinate Metrology”, Journal of the CMSC, Volume 7, No. 1, Spring 2012, Pages 20-27. J08 Platanitis, G., Pop-Iliev, R., Barari, A., 2012, “Development of a DSM-Based Methodology in an Academic Setting”, ASME Transactions- Journal of Mechanical Design, Vol. 134, Issue 2, Pages 021007-1 :11,11 pages, DOI: http://dx.doi.org/10.1115/1.4005591 J07 Barari, A., 2011, “Automotive‐ Body Inspection Uncertainty Due to Computational Complexity”, International Journal of Vehicle Design, Volume 57, No. 2/3, Pages 230-241, DOI: http://dx.doi.org/10.1504/IJVD.2011.044725 J06 Tebby, S., Esmailzadeh, E., Barari, A., 2011, “Methods to Determine Torsion Stiffness in an Automotive Chassis”, Journal of Computer-Aided Design and Applications, PACE Special Issue, Volume 1, Pages 67-75, DOI:http://dx.doi.org/10.3722/cadaps.2011.PACE.67-75 J05 Barari, A., Pop-Iliev R., 2009, “Reducing Rigidity by Implementing Closed-Loop Engineering in Adaptable Design and Manufacturing Systems”, Journal of Manufacturing Systems, Volume 28, Issues 2-3, Pages 47-54, July 2009, DOI:http://dx.doi.org/10.1016/j.jmsy.2009.04.003 J04 Barari, A., ElMaraghy H. A., ElMaraghy W. A., 2009,“Design For Machining of Sculptured Surfaces – A Computational platform”, ASME Transactions- Journal of Computing and Information Science in Engineering , Volume 9, Issue 3, June 2009 , 021006-1:13 pages. DOI: http://dx.doi.org/10.1115/1.3130143 J03 Barari, A., ElMaraghy H. A., Orban P., 2009, “NURBS Representation of Actual Machined Surfaces”, International Journal of Computer Integrated Manufacturing, Volume 22, Issue 5, May 2009, Pages 395 – 410, DOI: http://dx.doi.org/10.1080/09511920802392730 J02 Barari, A., ElMaraghy H. A., Knopf G. K., 2007, “Search – Guided sampling to reduce uncertainty of minimum zone estimation”, ASME Transactions- Journal of Computing and Information Science in Engineering, Volume 7, Issue 4, Pages 360-371, DOI: http://dx.doi.org/10.1115/1.2798114 J01 ElMaraghy H. A., Barari, A., Knopf G. K., 2004, “Integrated inspection and machining for maximum conformance to design tolerances”, CIRP Annals-Manufacturing Technology, Volume 53, No 1, Pages 411-416, DOI: http://dx.doi.org/10.1016/S0007-8506(07)60728-8 |
Conference Papers
| C131 Schneidler J., Berry C., Barari A., 2021, “Improving 3D Printing Geometric Accuracy Using Design of Experiments on Process Parameters in Fused Filament Fabrication (FFF)”, The 14th IEEE International Conference on Industry Application, São Paulo, Brazil, August 16-18, 2021. C130 Seyedi Sahebari S. M., Barari A., Abou Ziki J., 2021, “Neural Network Signal Processing in Spark Assisted Chemical Engraving (SACE) Micromachining”, The 14th IEEE International Conference on Industry Applications, São Paulo, Brazil, August 16-18, 2021. C129 Zonta T., Selvanathan J., Patel J., Wilson K., Kaura H., Berry C., Barari A., 2021, “Autonomous Snowblower Utilizing Internet of Things for Minimal Power Consumption”, The 14th IEEE International Conference on Industry Applications, São Paulo, Brazil, August 16-18, 2021. C128 Narang M., Rana M., Patel J., D’souza S., Onyechie P., Berry C., Barari A., 2021, “Fighting COVID: An Autonomous Indoor Cleaning Robot (AICR) Supported by Artificial Intelligence and Vision for Dynamic Air Disinfection”, The 14th IEEE International Conference on Industry Applications, São Paulo, Brazil, August 16-18, 2021. C127 Geran Malek N., Tayefeh M., Bender D., Barari A., 2021, “LIVE Digital Twin for Smart Maintenance in Structural Systems”, 17th IFAC Symposium on Information Control Problems in Manufacturing (INCOM 2021), Budapest, Hungary, June 7-9, 2021. C126 Lotfi Z.. Mostafapur A., Barari A., 2021, “Properties of Metal Extrusion Additive Manufacturing and Its Application in Digital Supply Chain Management”, 17th IFAC Symposium on Information Control Problems in Manufacturing (INCOM 2021), Budapest, Hungary, June 7-9, 2021. C125 Gohari H., Barari A., 2021, “Improving Geometric Tolerances in 3D Printable Pneumatic Valves Designed for Respiratory Mechanical Ventilators Amid Covid-19 Pandemic”, 17th IFAC Symposium on Information Control Problems in Manufacturing (INCOM 2021), Budapest, Hungary, June 7-9, 2021. C124 Ghanbary Kalajahi E., Mahboubkhah M., Barari A., 2021, “Numerical Versus Analytical Direct Kinematics in a Novel 4-DOF Parallel Robot Designed for Digital Metrology”, 17th IFAC Symposium on Information Control Problems in Manufacturing (INCOM 2021), Budapest, Hungary, June 7-9, 2021. C123 Ghanbary Kalajahi E., Mahboubkhah M., Barari A., 2021, “Reducing Noises in Digital Surface Inspection Using a Data Clustering Approach”, 17th IFAC Symposium on Information Control Problems in Manufacturing (INCOM 2021), Budapest, Hungary, June 7-9, 2021. C122 Kenji Ueda, E., Barari, A., Tsuzuki, M. S. G., 2021, “Determination of Open Boundaries in Point Clouds with Symmetry”, Proceedings of the 19th International Conference on Geometry and Graphics (ICGG 2020), São Paulo, Brazil, 9-13 August 2020, Springer, 332-342. C121 Duran, G. C., Sato, A. K., Tanabi, N., Nasiri, H., Takimoto, R. Y., Barari, A., Thiago, M. C., Tsuzuki, M., S. G., 2021, “Framework for Electrical Impedance Tomography Forward Problem with Non-uniform Electrodes Distribution”, Proceedings of the 19th International Conference on Geometry and Graphics (ICGG 2020), São Paulo, Brazil, 9-13 August 2020, Springer, 320-331. C120 Tanabi, N., L., Barari, A., Vakilipour, S., Tsuzuki F. S. G., Tsuzuki, M. S. G., 2021, “Inverse Designing Airfoil Aerodynamics in Compressible Flow by Target Pressure Distribution”, Proceedings of the 19th International Conference on Geometry and Graphics (ICGG 2020), São Paulo, Brazil, 9-13 August 2020, Springer, 308-319. C119 Najafabadi, H. R., Tiago, G. C., Thiago, M. C., Barari, A., Tsuzuki, M. S. G., 2021, “Multi-objective Topology Optimization Using Simulated Annealing Method”, Proceedings of the 19th International Conference on Geometry and Graphics (ICGG 2020), São Paulo, Brazil, 9-13 August 2020, Springer, 343-353. C118 Doria, F. F., Lima, F. B. C. L., Sato, A. K., Takimoto, R. Y., Barari, A., Tsuzuki F. S. G., Tsuzuki, M. S. G., 2021, “Soccer Field Lines Determination and 3D Reconstruction”, Proceedings of the 19th International Conference on Geometry and Graphics (ICGG 2020), São Paulo, Brazil, 9-13 August 2020, Springer, 568-579. C117 Filho, F. A., Munhoz, J. V., Takimoto, R. Y., Barari, A., Tsuzuki, M., S., 2021, “Human Thorax Parametric Reconstruction Using Computer Vision”, Proceedings of the 19th International Conference on Geometry and Graphics (ICGG 2020), São Paulo, Brazil, 9-13 August 2020, Springer, 580-591. C116 Gohari, H., Bender D., Barari, A., 2020, “3D Printable Pneumatic Valves for Rapidly Manufacturable Mechanical Ventilator Amid Covid-19 Outbreak”, 2020 IEEE 10th International Conference Nanomaterials: Applications & Properties (NAP), Sumy, Ukraine, 9-13 November 2020. C115 Gohari, H., Barari, A., 2020, “Producing High Precision Additive Manufacturing Parts by Direct Printing of NURBS Surfaces”, 2020 IEEE 10th International Conference Nanomaterials: Applications & Properties (NAP), Sumy, Ukraine, 9-13 November 2020. C114 Kenji Ueda, E., Barari, A., Tsuzuki, M., Sato, A., 2020, “Detection of Defected Zone Using 3D Scanning Data to Repair Worn Turbine Blades”, 21st IFAC World Congress, Berlin, Germany, Canada, 11-17 July 2020. C113 Gohari, H., Barari, A., Kishawy, H., Tsuzuki, M., 2020, “Effect of Direct Slicing on Precision Additive Manufacturing”, 21st IFAC World Congress, Berlin, Germany, 11-17 July 2020. C112 Mahboubkhah, M., Akhbari, S., Barari A., 2019, “Self-Configuration Machining capability of a 4-DOF parallel kinematic machine tool with nonsingular workspace for Intelligent Manufacturing Systems”, 13th IFAC Workshop on Intelligent Manufacturing Systems, Oshawa, Ontario, Canada, 12-14 August 2019. C111 Mahboubkhah, M., Aliakbari, M., Barari A., 2019, “An Intelligent Self-Calibrating 4-DOF Parallel Robot for Precise Geometric Data Collection in Digital Manufacturing”, 13th IFAC Workshop on Intelligent Manufacturing Systems, Oshawa, Ontario, Canada, 12-14 August 2019. C110 Bender D., Barari A., 2019, “Integrated Digital Design and Manufacturing for 3D Printing Technologies”, 13th IFAC Workshop on Intelligent Manufacturing Systems, Oshawa, Ontario, Canada, 12-14 August 2019. C109 Gohari Bahabadi, H., Barari A., Kishawy, H., Tsuzuki, M., 2019, “Intelligent Process Planning for Additive Manufacturing”, 13th IFAC Workshop on Intelligent Manufacturing Systems, Oshawa, Ontario, Canada, 12-14 August 2019. C108 Jankovics, D., Barari A., 2019, “Customization of Automotive Structural Components using Additive Manufacturing and Topology Optimization”, 13th IFAC Workshop on Intelligent Manufacturing Systems, Oshawa, Ontario, Canada, 12-14 August 2019. C107 Gohari Bahabadi, H., Berry, C., Barari A., 2019, “A Digital Twin for Integrated Inspection System in Digital Manufacturing”, 13th IFAC Workshop on Intelligent Manufacturing Systems, Oshawa, Ontario, Canada, 12-14 August 2019. C106 Umaras, E., Barari, A., Tsuzuki, M., 2019, “Intelligent Design Tolerance Allocation for Optimum Adaptability to Manufacturing Using a Monte Carlo Approach”, 13th IFAC Workshop on Intelligent Manufacturing Systems, Oshawa, Ontario, Canada, 12-14 August 2019. C105 Berry, C., Barari A., 2019, “Cyber-Physical System Utilizing Work-Piece Memory in Digital Manufacturing”, 13th IFAC Workshop on Intelligent Manufacturing Systems, Oshawa, Ontario, Canada, 12-14 August 2019. C104 Berry, C., Barari A., 2019, “Noise Filtration of 3D Scanned Data Points in Metrology of Highly Reflective Surfaces”, The 35nd Coordinate Metrology Systems Conference (CMSC), CMSC 2019, July 22 – 26, 2019, Orlando, Florida. C103 Gohari Bahabadi, H., Barari A., 2019, “GEOMETRIC COMPLEXITY ESTIMATION OF CONTINUOUS SURFACES FOR FITTING PROCESSES”, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE 2019, Aug 18-21, 2019, Anaheim, CA, USA. C102 Bender D., Barari A., 2019, “DIRECT SOLID ELEMENT SLICING IN TOPOLOGY OPTIMIZATION FOR ADDITIVE MANUFACTURING”, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE 2019, Aug 18-21, 2019, Anaheim, CA, USA. C101 Jankovics, D., Agelin-Chaab, M., Barari A., 2019, “Development of a Formula SAE Front Wing with an Emphasis on Additional Aerodynamic Devices”, 27th Annual Conference of the CFD Society of Canada (CFDSC) – CFD 2019, June 2-5, 2019, London, Canada. C100 Gohari Bahabadi, H., Barari A., 2019, “Accurate Estimation of Process Parameters in Fused Deposition Modeling”, Canadian Society of Mechanical Engineers (CSME) International Congress – CSME 2019, June 2-5, 2019, London, Canada. C99 Berry, C., Barari A., 2019, “Global Statistics Based Method for Denoising of Planar Point Clouds”, Canadian Society of Mechanical Engineers (CSME) International Congress – CSME 2019, June 2-5, 2019, London, Canada. C98 Bender, D., Barari A., 2019, “Multi-Element Slicing Approach for Intelligent Additive Manufacturing Preprocessing”, Canadian Society of Mechanical Engineers (CSME) International Congress – CSME 2019, June 2-5, 2019, London, Canada. C97 Ueda, E. K., Tsuzuki, M. S. G., Barari A., 2018, “Piecewise B´ezier Curve Fitting of a Point Cloud Boundary by Simulated Annealing”, 13th IEEE/IAS International Conference on Industry Applications., INDUSCON 2018, November 11-14, 2018, São Paulo, Brazil. C96 Bender D., Barari A., 2018, “Overhanging Feature Analysis for the Additive Manufacturing of Topology Optimized Structures”, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE 2018, Aug 26-29, 2018, Quebec City, Quebec, Canada. C95 Jankovics, D., Gohari, H., Tayefeh, M., Barari A., 2018, “Developing Topology Optimization with Additive Manufacturing Constraints in ANSYS®”, 16th IFAC Symposium on Information Control Problems in Manufacturing – INCOM 2018, June 11-13, 2018 Bergamo, Italy. C94 Berry, C., Barari A., 2018, “Closed-Loop Coordinate Metrology for Hybrid Manufacturing System”, 16th IFAC Symposium on Information Control Problems in Manufacturing – INCOM 2018, June 11-13, 2018 Bergamo, Italy. C93 Jankovics, D., Gohari, H., Barari A., 2018, “Constrained Topology Optimization For Additive Manufacturing Of Structural Components In Ansys®”, Canadian Society of Mechanical Engineers (CSME) International Congress – CSME 2018, May 27-30, 2018 Toronto, Canada. C92 Berry, C., Goodwin, L., Barari A., 2018, “Effect of the Error Propagation Rates in Developing a Skin Model of Measured Surfaces in Coordinate Metrology”, Canadian Society of Mechanical Engineers (CSME) International Congress – CSME 2018, May 27-30, 2018 Toronto, Canada. C91 Bender, D., Barari A., 2018, “Convergence Control for Topology Optimization”, Canadian Society of Mechanical Engineers (CSME) International Congress – CSME 2018, May 27-30, 2018 Toronto, Canada. C90 Hoursan, H., Ahmadian, M., Kazemiasfeh, R., Barari, A., 2018, “On the Validity Extent of Linear viscoelastic Models of Human Brain”, Canadian Society of Mechanical Engineers (CSME) International Congress – CSME 2018, May 27-30, 2018 Toronto, Canada. C89 Hoursan, H., Moradi, M., Hadjiazim, M., Ahmadian, M., Barari, A., 2018, “A Procedure for Performance Experimental Analysis of a Globe Control Valve”, Canadian Society of Mechanical Engineers (CSME) International Congress – CSME 2018, May 27-30, 2018 Toronto, Canada. C88 Berry C., Barari A., 2018, “Minimizing the Undercut Condition in On‐Machine Measurement Using Weighted Total Least Squares Fitting”, 7th International Conference of Metrology in Africa – CAFMET 2018, April 9-12, 2018 – Marrakesh, Morocco. C87 Lalehpour A., Barari A., 2017, “A Topology Optimization Paradigm for Additive Manufacturing”, Society of Manufacturing Engineering, The Authority on 3D Printing, Scanning and Additive Manufacturing, May 8-11, 2017 – Pittsburgh, Pennsylvania, Rapid + TCT 2017. C86 Gohari, H., Barari, A., 2017, “A Curvature-Based Direct Slicing Algorithm for Precision Additive Manufacturing”, Society of Manufacturing Engineering, The Authority on 3D Printing, Scanning and Additive Manufacturing, May 8-11, 2017 – Pittsburgh, Pennsylvania, Rapid + TCT 2017. C85 Gohari, H., Barari, A., Kishawy, H., “Using Multistep Methods in Slicing 2 ½ Dimensional Parametric Surfaces for Additive Manufacturing Applications”, The 12nd Workshop on Intelligent Manufacturing Systems, IMS 2016, December 5-7, 2016, National Instruments, Austin, TX, United States. C84 Lalehpour, A., Barari, A., “Post processing for Fused Deposition Modeling Parts with Acetone Vapour Bath”, The 12nd Workshop on Intelligent Manufacturing Systems, IMS 2016, December 5-7, 2016, National Instruments, Austin, TX, United States. C83 Gohari, H., Barari, A., “A New Data Reduction Approach in Coordinate Metrology Using Perona‐Malik Anisotropic Heat Diffusion”, The 32nd Coordinate Metrology Systems Conference (CMSC), CMSC 2016, July 25-29, 2016, Nashville, TN, United States. C82 Berry, C., Lalehpour, A., Barari, A., “Dynamic Point Selection Strategy In Coordinate Metrology of Flat Surfaces”, XII-th INTERNATIONAL SCIENTIFIC CONFERENCE, Coordinate Measuring Technique, CMT 2016, April 18 – 20 , 2016, Szczyrk, Poland. C81 Gohari, H., Barari, A., “Proper Initial Condition for Deviation Zone Evaluation of a Freeform Surface Using Principle Component Analysis”, XII-th INTERNATIONAL SCIENTIFIC CONFERENCE, Coordinate Measuring Technique, CMT 2016, April 18 – 20 , 2016, Szczyrk, Poland. C80 Lalehpour, A., Berry, C., Barari, A., “An experimental study on the effect of sampling strategy in coordinate measurement of planar surfaces”, XII-th INTERNATIONAL SCIENTIFIC CONFERENCE, Coordinate Measuring Technique, CMT 2016, April 18 – 20 , 2016, Szczyrk, Poland. C79 Barari, A., Lalehpour, A., Jamiolahmadi, S., “A Finite Element Approach to Estimate the Detailed Deviation Zone in Coordinate Metrology”, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE 2015, Aug 2-5, 2015, Boston, MA, United States. DOI: http://dx.doi.org/10.1115/DETC2015-48008 C78 Barari, A., Kaji, F., “Modelling of Cusp Geometry in Additive Manufacturing Parts Using a Piece-Wise Polynomial”, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE 2015, Aug 2-5, 2015, Boston, MA, United States. C77 Jamiolahmadi, S., Barari, A., “Convergence Study of Genetic Programming Approach to Estimate Surface Integrity on Additive Manufacturing Parts”, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE 2015, Aug 2-5, 2015, Boston, MA, United States. DOI: http://dx.doi.org/10.1115/DETC2015-47997 C76 Fallah, A., Ahmadian, M.T., Barari, A., “Nonlinear Free Vibration of Piezoelectric Functionally Graded Beams in Thermal Environment”, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE 2015, Aug 2-5, 2015, Boston, MA, United States. DOI: http://dx.doi.org/10.1115/DETC2015-46163 C75 Barari, A., Lalehpour, A., “Estimation of the Detailed Deviation Zone in Coordinate Metrology Using a Finite Element Solution”, The 31st Coordinate Metrology Systems Conference (CMSC), CMSC 2015, July 20-24, 2015, Hollywood, MI, United States. C74 Barari, A., Jamiolahmadi, S., “A Genetic Programming Approach to Model Detailed Surface Integrity of Additive Manufacturing Parts”, IFAC Symposium on Information Control in Manufacturing (INCOM 2015), May 10-13, 2015, Ottawa, Canada. DOI: http://dx.doi.org/10.1016/j.ifacol.2015.06.437 C73 Marchesi, T., Lahuerta, R., Silva, E., Tsuzuki, M., Martins, T., Barari, A., Wood, I., “Topologically Optimized Diesel Engine Support Manufactured with Additive Manufacturing”, IFAC Symposium on Information Control in Manufacturing (INCOM 2015), May 10-13, 2015, Ottawa, Canada. DOI: http://dx.doi.org/10.1016/j.ifacol.2015.06.436 C72 Barari, A., Kaji, F., “Evaluation of the Surface Roughness of Additive Manufacturing Parts Based on the Modeling of Cusp Geometry”, IFAC Symposium on Information Control in Manufacturing (INCOM 2015), May 10-13, 2015, Ottawa, Canada. DOI: http://dx.doi.org/10.1016/j.ifacol.2015.06.157 C71 Martins, T., Tsuzuki, M., Barari, A., 2014, “Sampling Plan for Coordinate Metrology Using Uncertainty Analysis”, ASME International Mechanical Engineering Congress & Exposition, IMECE 2014,November 14-20, 2014, Montreal, Canada. C70 Wood, I., Barari, A., Esmailzadeh, E., 2014, “Using Simple Structural Beam Model to Optimize for Bending Stiffness and Vibration in Automotive Structures”, ASME International Mechanical Engineering Congress & Exposition, IMECE 2014,November 14-20, 2014, Montreal, Canada. DOI: http://dx.doi.org/10.1115/IMECE2014-37992 C69 Mordo, S., Popravko, V., Barari, A., 2014, “Surface tribology Study Resulting by Diamond-like Carbon Coating”, ASME International Mechanical Engineering Congress & Exposition, IMECE 2014, November 14-20, 2014, Montreal, Canada. DOI: http://dx.doi.org/10.1115/IMECE2014-38776 C68 Jamiolahmadi, S., Barari, A., 2014, “Surface Roughness Model for Additive Manufacturing Parts Using Finite Difference Method”, ASME International Mechanical Engineering Congress & Exposition, IMECE 2014, November 14-20, 2014, Montreal, Canada. C67 Jamiolahmadi, S., Barari, A., 2014, “Validation of Using Finite Difference Method to Estimate Detailed Deviation Zone in Coordinate Metrology”, Advanced Mathematical and Computational Tools in Metrology and Testing (AMCTM 2014), D.I.Mendeleyev Institute for Metrology (VNIIM), 9 and 10-12 September, 2014, St.Petersburg, Russia. C66 Saadatnia, Z., Barari, A., Esmailzadeh, E., 2014, “Nonlinear Forced Vibration Analysis of Free-Form Nanotube Conveying Fluid”, The 14th IEEE International Conference on Nanotechnology, August 18-22, 2014, Toronto, Canada. DOI: http://dx.doi.org/10.1109/NANO.2014.6968150 C65 Wood, I., Barari, A., Esmailzadeh, E., 2014, “Using the Simple Structural Beam (SSB) Model to Optimize and Analyze Automotive Structures for Bending Stiffness and Natural Frequency”, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC/CIE 2014, Aug 19-22, 2014, Buffalo, NY, United States. DOI: http://dx.doi.org/10.1115/DETC2014-35549 C64 Jamiolahmadi, S., Barari, A., 2014, “An Approach to Estimate the Detailed Deviation Zone in Coordinate Metrology Using Harmonic Function Properties”, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC/CIE 2014, Aug 19-22, 2014, Buffalo, NY, United States. DOI: http://dx.doi.org/10.1115/DETC2014-35575 C63 Sikder, S., Barari, A., Kishawy, H., 2014, “Effect of Adaptive Slicing on Surface Integrity in Additive Manufacturing”, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC/CIE 2014, Aug 19-22, 2014, Buffalo, NY, United States. DOI: http://dx.doi.org/10.1115/DETC2014-35559 C62 Mordo, S., Popravko, V., Barari, A., 2014, “Effect of Diamond-Like-Carbon Coating on 3D Surface Roughness”, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC/CIE 2014, Aug 19-22, 2014, Buffalo, NY, United States. DOI: http://dx.doi.org/10.1115/DETC2014-35580 C61 Martins, T., Tsuzuki, M., Takimoto, R., Barari, A., 2014, “Algorithmic Iterative Sampling in Coordinate Metrology Plan for Coordinate Metrology Using Dynamic Uncertainty Analysis”, The 12th IEEE International Conference on Industrial Informatics, July 27-30, 2014, INDIN 2014, Porto Alegre, Brazile. DOI: http://dx.doi.org/10.1109/INDIN.2014.6945531 C60 Barari, A., 2014, “Optimized Vapor Treatment Operation for Fused Deposition Modeling Process to Improve Surface Quality”, Society of Manufacturing Engineering, The Authority on 3D Printing, Scanning and Additive Manufacturing, JUNE 9-12, 2014, Cobo Center, Detroit, MI, Rapid 2014. C59 Wood, I., Barari, A., Esmailzadeh, E., 2014, “Using The Simple Structural Beam Model to Optimize and Analyze Automotive Structures for Torsion Stiffness and Fundamental Natural Frequency”, Canadian Society for Mechanical Engineering International Congress 2014, June 1-4, 2014, Toronto, Ontario, Canada. C58 Jamiolahmadi, S., Barari, A., 2014, “Setting a Proper Convergence Criteria in Finite Difference-Based Development of Detailed Deviation Zone”, Canadian Society for Mechanical Engineering International Congress 2014, June 1-4, 2014, Toronto, Ontario, Canada. C57 Mordo, S., Popravko, V., Barari, A., 2014, “Modeling the Effect of Diamond-Like Carbon Coating on Surface Friction”, Canadian Society for Mechanical Engineering International Congress 2014, June 1-4, 2014, Toronto, Ontario, Canada. C56 Sikder, S., Barari, A., Kishawy, H., 2014, “Adaptive Direct Slicing to Improve Surface Quality in Additive Manufacturing”, Canadian Society for Mechanical Engineering International Congress 2014, June 1-4, 2014, Toronto, Ontario, Canada. C55 Barari, A., Jamiolahmadi, S., 2014, “Estimation of Surface Roughness of Additive Manufacturing Parts Using Finite Difference Method”, American Society for Precision Engineering (ASPE) Spring Topical Meeting April 13-16, 2014, University of California, Berkeley, CA, USA. C54 Sikder, S., Barari, A., Kishawy, H., 2014, “Enhancing Surface Finish and Dimensional Accuracy in Additive Manufacturing Using Global Adaptive Direct Slicing”, American Society for Precision Engineering (ASPE) Spring Topical Meeting April 13-16, 2014, University of California, Berkeley, CA, USA. C53 Barari, A., 2014, “Effect of Direct Slicing on Geometric Tolerances in Additive Manufacturing Process”, American Society for Precision Engineering (ASPE) Spring Topical Meeting April 13-16, 2014, University of California, Berkeley, CA, USA. C52 Askari, H., Barari, A., Esmailzadeh, E., 2013, “Analysis of Nonlinear Oscillation of Circular Curved Carbon Nanotube”, The 13th IEEE International Conference on Nanotechnology, August 5-8, 2013, Beijing, China. DOI: http://dx.doi.org/10.1109/NANO.2014.6968150 C51 Barari, A., Kaji, F., 2013, “Comparing the Uncertainty of Coordinate Metrology as a Function of Sampling Strategy in Optical and Tactile Inspection Systems”, The 29th Coordinate Metrology Systems Conference (CMSC), CMSC 2013, July 22-26, 2013, San Diego, California, United States. C50 Askari, H., Barari, A., Esmailzadeh, E., 2013, “Analytical Solution for Nonlinear Vibration of Sinusoidal Curved Carbon Nanotube”, 4th Canadian Conference on Nonlinear Solid Mechanics (CanCNSM2013), July 23-26, 2013, Montreal, QC, Canada. C49 Heroux, A., Tutunea-Fatan, O. R., Salisbury, S. P., Barari, A., 2013, “Minimization of Bone Removal Through Optimal Humeral Implant Alignment in Total Elbow Arthroplasty”, International CAD Conference, CAD’13, June 17-20, 2013 University of Bergamo, Bergamo, Italy. C48 Tebby, S., Barari, A. Esmailzadeh, E., 2013, “Substituting Simple Structural Beam-Frame Substructures with Equivalent Beam-Plate Combinations”, International CAD Conference, CAD’13, June 17-20, 2013 University of Bergamo, Bergamo, Italy. C47 Barari, A., Mordo, S., 2013, “Iterative Sampling for Flatness Inspection Using High Density Data Points”, International CAD Conference, CAD’13, June 17-20, 2013 University of Bergamo, Bergamo, Italy. C46 Sikder, S., Barari, A., Kishawy, H., 2013, “Adaptive Slicing Approach to Control Surface Error Factor in Rapid Prototyping Process”, International CAD Conference, CAD’13, June 17-20, 2013 University of Bergamo, Bergamo, Italy. C45 Ghani, O. A., Barari, A., Agelin-Chaab, M., 2013, “Wake Structure and Aerodynamic Characteristics of Rectangular Cylinders”, CANCAM 2013, 24th Canadian Congress of Applied Mechanics, June 2-6, 2013, Saskatoon, Canada. C44 Mordo, S., Popravko, V., Barari, A., 2013, “Study of the Effect of Substrate on 3D Surface Roughness in Diamond-Like-Carbon Coating Process”, IFAC Conference on Manufacturing, Modeling, Management, and Control, MIM2013, June 19-21, 2013, Saint Petersburg, Russia. DOI: http://dx.doi.org/10.3182/20130619-3-RU-3018.00585 C43 Sikder, S., Barari, A., Kishawy, H., 2013, “Control of NURBS-Based Surface Error Factor Using a Manufacturing Cost Optimization in Rapid Prototyping Process”, IFAC Conference on Manufacturing, Modeling, Management, and Control, MIM2013, June 19-21, 2013, Saint Petersburg, Russia. DOI: http://dx.doi.org/10.3182/20130619-3-RU-3018.00577 C42 Diba, F., Barari, A., Esmailzadeh, E., 2012, “Active Aerodynamic System to Improve the Safety and Handling of Race Cars in Lane Change and Wet Road Maneuvers”, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC/CIE 2012, Aug 12-15, 2012, Chicago, IL, United States. http://dx.doi.org/10.1115/DETC2012-71272 C41 Tebby, S., Barari, A. Esmailzadeh, E., 2012, “Analysis and Optimization of Automotive Structure’s Bending Stiffness Using Beam Elements”, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC/CIE 2012, Aug 12-15, 2012, Chicago, IL, United States. DOI: http://dx.doi.org/10.1115/DETC2012-71288 C40 Barari, A., 2012, “Tolerance Allocation for Structures subject to Various Loading Events”, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC/CIE 2012, Aug 12-15, 2012, Chicago, IL, United States. DOI: 10.1115/DETC2012-71369 C39 Barari, A., 2012, “Profile Tolerance Allocation for Rapid Prototyping of Sculptured Surfaces in a Direct Slicing Process”, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC/CIE 2012, Aug 12-15, 2012, Chicago, IL, United States. DOI: http://dx.doi.org/10.1378/chest.114.1.340 C38 Barari, A., “Tolerance allocation Based on the Minimum Deformation Zone of Finite Element Structural Frame Analysis”, International CAD Conference, CAD’12, Jun 11-14, 2012, Niagara Falls, Ontario, Canada. C37 Tebby, S., Barari, A. Esmailzadeh, E., 2012, “Optimization of Vehicle Structure Considering Torsion Stiffness Using Simple Structural Beam Frame-Approach”, International CAD Conference, CAD’12, Jun 11-14, 2012, Niagara Falls, Ontario, Canada. C36 Sikder, S., Barari, A., Kishawy, H., 2012, “Effect of a New Adaptive Slicing Approach to Control Cusp Height of Rapid Prototyping Parts”, International CAD Conference, CAD’12, Jun 11-14, 2012, Niagara Falls, Ontario, Canada. C35 Tebby, S., Barari, A. Esmailzadeh, E., 2012, “Optimization of Vehicle Structure Considering Torsion Stiffness Using Simple Structural Beam Frame-Approach”, Canadian Society for Mechanical Engineering International Congress 2012, June 4-6, 2012, Winnipeg, Manitoba, Canada. C34 Diba, F., Barari, A., Esmailzadeh, E., 2012, “Dynamic Performance Enhancement of Small Size Racing Car”, Canadian Society for Mechanical Engineering International Congress 2012, June 4-6, 2012, Winnipeg, Manitoba, Canada. C33 Abbasi, A., Barari, A., Ahmadian, M.T., 2012, “Deformation Prediction of Biological Cells in Cell Injection Experiment Using Support Vector Machine Modeling”, Canadian Society for Mechanical Engineering International Congress 2012, June 4-6, 2012, Winnipeg, Manitoba, Canada. C32 Ahmadian, M.T., Barari, A., Saljooghi, R, 2012, “Buckling Criteria of FGM Beams Using Reproducing Kernel Particle Method”, Canadian Society for Mechanical Engineering International Congress 2012, June 4-6, 2012, Winnipeg, Manitoba, Canada. C31 Abbasi, A., Ahmadian, M.T., Barari, A., 2012, “Biological Cells Modeling Under Needle Injection Experiment”, Canadian Society for Mechanical Engineering International Congress 2012, June 4-6, 2012, Winnipeg, Manitoba, Canada. C30 Sikder, S., Barari, A., Kishawy, H., 2012, “Controllability of Surface Roughness by Adaptive Slicing in Rapid Prototyping Manufacture”, Canadian Society for Mechanical Engineering International Congress 2012, June 4-6, 2012, Winnipeg, Manitoba, Canada. C29 Ghanati, G., Ahmadian, M.T., Firoozbakhsh, K., Rouzbeh, B., Barari, A., 2012, “Prediction of Bone Remodeling Around a Novel Dental Implant with an Elastomeric Internal Layer, Simulating Periodontal Ligaments’ Function”, Canadian Society for Mechanical Engineering International Congress 2012, June 4-6, 2012, Winnipeg, Manitoba, Canada. C28 Hadipour, M., Ahmadian, M. T., Lashkari S.G., Barari, A., 2011, “Natural Frequency Improvement of a Suspended FGM bridge”, ASME International Mechanical Engineering Congress & Exposition, IMECE 2011,November 11-17, 2011,Denver, Colorado, United States. DOI: http://dx.doi.org/10.1115/IMECE2011-63411 C27 Mazaheri, H., Hosseinzadeh, A., Ahmadian, M. T., Barari, A., 2011, “Nonlinear Vibration Analysis of a Micro Beam Exposed to an External Flow”, ASME International Mechanical Engineering Congress & Exposition, IMECE 2011,November 11-17, 2011,Denver, Colorado, United States. DOI: http://dx.doi.org/10.1115/IMECE2011-64722 C26 Mazaheri, H., Hosseinzadeh, A., Ahmadian, M. T., Barari, A., 2011, “Analytical Approach to Vibration Analysis of a Pendulum Wrapping on a Cylinder”, ASME International Mechanical Engineering Congress & Exposition, IMECE 2011,November 11-17, 2011,Denver, Colorado, United States. DOI: http://dx.doi.org/10.1115/IMECE2011-62856 C25 Sarvi, M.N., Ahmadian, M. T., Barari, A., 2011, “Deformation and Stress Analysis of the Fullerene by Super Element”, ASME International Mechanical Engineering Congress & Exposition, IMECE 2011,November 11-17, 2011,Denver, Colorado, United States. DOI: http://dx.doi.org/10.1115/IMECE2011-63741 C24 Barari, A., 2011, “Coordinate Metrology Based on Maximum Conformance to Tolerances for Closed-Loop Fabrication”, 26th Annual Meeting of the American Society for Precision Engineering, November 13 -18, 2011, Denver, CO, United States. C23 Barari, A., 2011, “Reducing the Coordinate Metrology Uncertainty by Employing an Integrated Computational System”, the second International Congress on Mechanical Metrology, IICIMMEC, September 27-30, 2011, Natal, Brazil. C22 Barari, A., 2011, “Estimation of detailed deviation zone of inspected surfaces”, Advanced Mathematical and Computational Tools in Metrology and Testing, AMCTM 2011, June 20-22, 2011, Göteborg, Sweden. C21 Tebby, S., Esmailzadeh, E., Barari, A., 2011, “Comparison of Numerical Methods for Determining Torsion Stiffness of Automotive Chassis”, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC/CIE 2011, Aug 28-31, 2011, Washington, DC, United States. DOI: http://dx.doi.org/10.1115/DETC2011-48026 C20 Barari, A., Diba, F., Esmailzadeh, E., 2011, “Down Force Control of the low Velocity Racing Car Using Active Aerodynamic Inverse Wings”, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC/CIE 2011, Aug 28-31, 2011, Washington, DC, United States. DOI: http://dx.doi.org/10.1115/DETC2011-48308 C19 Barari, A., 2011, “Evaluation of Deviation Zone Based on Maximum Conformance to Tolerances”, ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC/CIE 2011, Aug 28-31, 2011, Washington, DC, United States. DOI: http://dx.doi.org/10.1115/DETC2011-48444 C18 Barari, A., 2011, “Profile Coordinate Metrology Based on Maximum Conformance to Tolerances”, The 27th Coordinate Metrology Systems Conference (CMSC), CMSC 2011, July 25-29, 2011, Phoenix, Arizona, United States. C17 Tebby, S., Esmailzadeh, E., Barari, A., 2011, “FEA-Based Methods to Determine Torsion Stiffness in Automotive Structure”, 2011 PACE Annual Forum, Collaborative Strategies to Address Global Challenges, July 25-30, 2011, Vancouver, British Columbia, Canada. C16 Barari, A., 2011, “Estimation of Detailed Deviation Zone in Coordinate Metrology”, 13th International Conference on Metrology and Properties of Engineering Surfaces, Met & Props 2011, April 12-15, 2011, National Physical Laboratory , Teddington, Middlesex, England. C15 Barari, A., Rolstin, J., 2010, “Design of Adjustable Aerodynamic System for a Low Velocity High Down-Force Application”, 2010 PACE Annual Forum, Facing Global Challenges- Solutions for the Future, July 19-23, Seoul – Korea. C14 Barari, A., 2010, “FEM-Based Optimum Design of Vehicle’s Door Hinge to Maintain the Desired Auto-Body Gap Tolerances”, 2010 PACE Annual Forum, Facing Global Challenges- Solutions for the Future, July 19-23, Seoul – Korea. C13 Platanitis, G., Pop-Iliev, R., Barari, A., 2010, “Comprehensive Use of a DSM-Based Methodology in an Academic Setting”, International Design Conference – DESIGN 2010, May 17 – 20, Dubrovnik – Croatia. C12 Platanitis, G., Barari, A., Pop-Iliev, R., 2010, “Introducing Design Rigidity to Model Unexpected Disturbances In a DSM-Based Design Process”, ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference- IDETC/CIE 2010, DETC2010-28218, pp. 453-460, August 15-18, Montreal, Quebec – Canada. DOI: http://dx.doi.org/10.1115/DETC2010-28218 C11 Barari, A., 2010, “CAM-Based Inspection of Machined Surfaces”, 5th International Conference on Advances in Production Engineering- APE2010, 17 – 19 June 2010, Warsaw, Poland. C10 Platanitis, G., Pop-Iliev, R., Barari, A., 2009, “A DSM-based Method for Investigating the Impact of Random Disturbances on the Outcome of a Design Project”, Proceeding of 11th International Design Structure Matrix Conference (DSM 09), 12 – 13 OCTOBER 2009, Greenville, South Carolina, USA. C09 Barari, A., 2009, “Misinterpretation of Geometric Dimensioning and Tolerancing in Coordinate Metrology”, Electronic proceeding of 11th International CIRP Conference on Computer Aided Tolerancing – Geometric Variations within Product Life Cycle Management (CAT2009), March 2009, Annecy, France. C08 Barari, A., Pop-Iliev R., 2009, “Integration of Design Tolerance Analysis and Statistical Production Control in the Product Lifecycle Management”, Electronic proceeding of 11th International CIRP Conference on Computer Aided Tolerancing – Geometric Variations within Product Life Cycle Management (CAT2009), March 2009, Annecy, France. C07 Barari, A., 2008, “Sources of Uncertainty in Coordinate Metrology of Automotive Body”, CD Proc. of 2nd CIRP International Conference on Assembly Technologies and Systems (CATS 2008), Toronto, Canada. C06 Barari, A., Pop-Iliev R., 2007, “Closed-Loop Engineering in Adaptable Design and Manufacturing Systems”, CD Proc. of 2nd International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 2007), Toronto, Canada. C05 Barari A., and ElMaraghy H. A., 2005, “Manufacturing driven design of sculptured surfaces”, 15th CIRP International Conference in Design, Egypt, pp. 523-534. C04 Barari A., ElMaraghy. H. A., and Knopf G. K., 2005, “Evaluation of geometric deviations in sculptured surfaces using probability density estimation”, CD Proc. of 9th CIRP International Seminar on Computer Aided Tolerancing (CAT2005), Tempe, Arizona, USA. C03 Barari A., ElMaraghy H. A., Knopf G. K., and Orban P., 2004, “Integrated inspection and machining approach to machining error compensation; Advantages and limitations”, The 14th International Conference on Flexible Automation & Intelligent Manufacturing, Toronto, Canada, pp. 563-572. C02 ElMaraghy H. A., Barari, A., Knopf G. K., 2004, “Integrated inspection and machining for maximum conformance to design tolerances” 54th CIRP General Assembly, Krakow, Poland. C01 Barari A., Ahmadian M. T., 1999, “Optimum slicing of model for rapid prototyping”, The 4th SMEIR Conference on Manufacture Engineering, Tehran, Iran, pp. 218-228. |
Contribution to Books
| B04 Goto T. G., Najafabadi H. R., Duran G. C., Ueda E. K., Sato A. K., Martins T. C., Takimoto R. Y., Gohari H., Barari A., Tsuzuki M. S.G., 2021,, 2021, “Versatility of Simulated Annealing with Crystallization Heuristic: Its Application to a Great Assortment of Problems” Optimization Problems in Engineering, Open access peer-reviewed chapter – ONLINE FIRST, IntechOpen, DOI: http://dx.doi.org/10.5772/intechopen.98562 B03 Barari A., 2012, “Chapter 2- Estimation of Detailed Deviation Zone of Inspected Surfaces”, Series on Advances in Mathematics for Applied Sciences, Volume. 48 – Advanced Mathematical and Computational Tools in Metrology and Testing IX, March 2012, World Scientific, Editor: Franco Pavese, Markus Bär, Jean-Rémy Filtz, Alistair B Forbes, ISBN: 978-981-4397-94-0, Pages 18-26, DOI: http://dx.doi.org/10.1142/9789814397957_0003 B02 Barari A., ElMaraghy H. A., Knopf G. K., 2007, “Evaluation of geometric deviations in sculptured surfaces using probability density estimation”, Models for Computer Aided Tolerancing in Design and Manufacturing, Springer Netherlands, Editor: Joseph K. Davidson, ISBN: 978-1-4020-5437-2, Pages 135-146, DOI: http://dx.doi.org/10.1007/1-4020-5438-6_15 B01 Barari A., ElMaraghy H. A, 2006, “Manufacturing driven design of sculptured surfaces”, Springer Series in Advanced Manufacturing – Advances in Design, Springer-Verlag, Germany, Editors: Hoda A. ElMaraghy and Waguih H. ElMaraghy, ISBN 1-84628-004-4, Pages 523-534. DOI: http://dx.doi.org/10.1007/1-84628-210-1_43 EB03 Barari, A., Tsuzuki, M., S. G., Cohen, Y., and Macchi, M., “Intelligent manufacturing Systems Towards Industry 4.0 Era“, Journal of Intelligent Manufacturing, Special Issue, (2021). EB02 Barari A., IFAC-PapersOnLine , Special Issue for 13th IFAC Workshop on Intelligent Manufacturing Systems IMS 2019”, ScienceDirect, Volume 52, Issue 10, Pages 1-406 (2019), https://www.sciencedirect.com/journal/ifac-papersonline/vol/52/issue/10 EB01 Barari A., “Concurrent Engineering and Design”, McGraw Hill, 2008, ISBN: 9780070262187, 480 pages. |